Sensor & Detector Module

Parameter: Comprehensive error: 0.05% F.S Rated output temperature drift: ≤ 0.15% F.S / 10 ℃ Output Sensitivity: 1.0 ± 0.1 mV / V Zero drift: 0.05% F.S (1 minute) Zero point temperature drift: 0.2% F.S / 10 ° C Zero output: ± 0.1 mV / V Input impedance: 1000 ± 50Ω Output impedance: 1000 ± ..

Introduce:The INA226 has a maximum 0ffset voltage of 10 microvolts (uV), a maximum gain error of 0.1%, and is 10 times more accurate than industry-leading competitors. The device is a complete 16-bit single-chip solution that provides fully programmable measurements of current, voltage, and power fo..

1# ZD-JG18-30N1  (NPN,3 wire,NO, DC24V)2# ZD-JG18-30N2 (NPN,3 wire,NC,  DC24V)3# ZD-JG18-30P1 (PNP,3 wire,NO, DC24V)4# ZD-JG18-30P2 (PNP,3 wire,NC, DC24V)Specifications:Model:ZD-JG18-30Work Voltage:6-36VDCCrust Material: PlasticQuiescent current: ≤2.5mADetection object: any dielectric substanceInsta..

Feature:This is a non-embedded three-wire NPN normally open metal sensor. There is an LED on the sensor. After power-on, the light is on when metal is close to the detection range of the sensor, and the light is off when the metal leaves the detection range of the sensor. The inductive proximity swi..

Feature: 4 infrared LED illuminators (940nm)1 infrared receiver (38kHz) Package includes: 1 x IRM SensorWiring, for reference only...

Description :  The sensor module light is adaptable to the environment, the working voltage of 3.3 V to 5 V. It has a pair of infrared transmitting and receiving tube, when detecting direction meet with obstacles (reflecting surface), reflected infrared receiving by the tube. After the c..

Features:Operating voltage: 5V Wavelength:650 nm PCB size :15 x 24 mm Depth: 8 mm Weight: 2.2g Wavelength: 650 nmPackage included:1 x KY-008 Laser Transmitter Module..

Description: The sensor module is including resistive humidity sensing component and NTC temperature testing The compatible digital temperature humidity sensor module is component and connected with 8-byte MCU Great anti-interference ability and durable With fixed bolt hole for easy installati..

Description: - High sensitivity IR receiver- Extremely sensitive to wave between 760-1100nm- With power supply indicator lamp and comparator output indicator lamp- AO, real-time thermister voltage signal output and high / low electric level signal output,Analog quantity output- Thr..

Features: - Single channel signal output- Low level output signal used for human body touch sensor alarm- Adjustable sensitivity- With fixed bolt hole for easy installation Specifications: Working voltage: for DC 5VMaterial: PCB + BrassDimensions: 43 x 16 x 1..

Features: PCB size: 1.5 x 1.9cm Working voltage: 5V Output high level when receive laser signal Output low level when not receive laser signal Note: The sensor uses a non-modulated laser receiver, please use indoors where no light, sunlight or other fixtures may interfere, recommended fo..

Description:1. Working voltage: DC 5V2. Working current 7-12MA3. One power indicator light, four water level indicator lights4. Four water level output interfaces (low level 0V, high level 3.7V),for MCU IO5. Four water level sensor interfaces (2P XH2.54)6. Size: 32mm X 28mm X 11mm(With Pin),32mm X 2..