Sensor & Detector Module

Package Included:1 x LilyPad TEMT6000 Light Sensor Module..

Features:  - Power consumption: 0.9 mA in combo normal mode and 1.25 mA in combo high-performance mode up to 1.6 kHz.- “Always on” experience with low power consumption for both accelerometer and gyroscope- Smart FIFO up to 8 kbyte based on features set- Compliant with Android K and L..

Description: HEART RATE HAT is a blood oxygen heart rate sensor. Integrate MAX30102 to provide a complete pulse oximeter and heart rate sensor system solution. This is a non-pluggable blood oxygen heart rate sensor. The sensor uses I2C communication interface, internally integrates infrared light-em..

Description: Optical Heart-Rate Monitor and Pulse Oximetry Solution Size: 12.7mm x 12.7mm (0.5in x 0.5in) Low Power Device Drivers Highly-integrated, small-size sensor Non-chest based heart-rate/SpO2 detection Ultra-low power consumption  Applications: Wearables  ..

>>> Manual: Click here to open..

Description: Detecting temperature changes has never been easier. The MCP9700 is a small thermistor type temperature sensor. This sensor will output 0.5V at 0 degrees C, 0.75V at 25 C, and 10mV per degree C. Doing an analog to digital conversion on the signal line will allow you to establish ..

Product Specifications:Product Name: Soil Moisture SensorSize: 36×15×7mmVoltage: 3.3 -12VDCCurrent:Working..

Description:Unit Key is a single mechanical key input unit with built-in RGB LED. The key shaft adopts Blue switch with tactile bump and audible click features. Embedded with one programable RGB LED - SK6812, supports 256 level brightness. Two digital IOs are available for key status and LED control..

Overview :The MH-Z19E carbon dioxide gas sensor (hereinafter referred to as the sensor) is a general-purpose intelligent small sensor. It has two products: pin and terminal. It uses the principle of non-dispersive infrared (NDIR) to detect CO2 in the air and has good selectivity. , No oxygen depend..

Description:  Applying Orange gold appearance, the design is beautiful and generous. Key Colour Matching: Red/Blue. Covers are optional and can be replaced by themselves. The buttons are flexible and have a good handle. Package included: 1 x KitteBot Microbit UNOR3..

Description: This HB100 Miniature Microwave Motion Sensor is a X-Band Bi-Static Doppler transceiver module. Its built-in Dielectric Resonator Oscillator (DRO) and a pair of Microstrip patch antenna array, make it ideal for OEM usage in motion detection equipment. This module is ideally suitable f..

Description: OP.90 and OP.180 are two limit switches with different orientation placement. Build with a ITR9606, which is consist of an infrared emitting diode and a silicon phototransistor.  They are used for controlling machinery as part of a control system, as a safety interlock, or to cou..