Sensor & Detector Module

Feature: ESP32 Characteristic Description GPIO25 1-1 of Infrared receiverPackage includes:1 x Infrared receiver 1 x Cable..

Feature:PIR sensors are commonly used for security alarms and automatic lighting applications.The PIR sensor detects general motion but does not provide information about the motor or moving object. ESP32 Characteristic Description GP..

Features:TCRT5000 sensor of infrared emission diode constantly launch infrared, the infrared ray is emitted when the intensity of reflected back has not been reflected or but is not big enough, the light activated triode has been in the off state, the output end of the module at this time for the ..

PNP: Indicates that it is usually high, and the signal is negative when the signal arrives.NPN: It means that it is low level at ordinary times, and the signal is output at high level when the signal arrives.NO: normally openNC: Normally closed>>>Manual: Click here to open..

Specification:ModelTOF050CTOF200CTOF400CRanging chipVL6180VL53L0XVL53L1XMeasuring distance50CM (Max)2M (Max)4M (Max)Measurement dead zone Infrared emission mechanism0-2CM850nm0-3CM940nm0-4CM940nmFOV25°25°27°Communication modeIICDevelopment routines/softwareFor Arduin0 Demo / STM32 DemoOperating Volt..

Temperature control setting method:1. Double-click the "S" key to enter the time setting, the default timing unit is seconds2. Start the temperature setting: the blue digital tube flashes, click UP or DOWN to adjust the size. Click S to switch to the next item3. Stop the temperature setting: the red..

Timing switch setting method:1. Double-click the "S" key to enter the time setting, the default timing unit is seconds2. Power-on timing settings: the blue digital tube flashes, click UP or DOWN to adjust the size, click S to switch to the next item3. Power-off timing setting: the red digital tube f..

Description:   1, Onboard TTP223 capacitive touch a single bond induction IC. 2, Board level indicator. 3, Working voltage: 2.0 V to 5.5 V. 4, The size of the PCB board: 29 (mm)x16 (mm).   Package included:   1 x TTP223 Capacitive Touch Switch Digital Touch Sensor Module..

Description:TVOC/eCO2 mini Unit is a digital multi-pixel gas sensor unit with integrated SGP30. It mainly measures various VOC (volatile organic compounds) and H2 in the air. It can be programmed to detect TVOC (total volatile organic compounds) and eCO2 (equivalent carbon dioxide reading)Concentra..

Introduction: MH-ET LIVE Scanner v3.0 is a barcode and QR code scanning recognition module. It adopts a professional image processing chip for barcode recognition. It can quickly and accurately read under the high performance of fast and stable reading in complex environments. Take one-dimens..

Features: 1.100% complete machine chip, wave soldering, stable performance, good consistency2. Embedded central processor chip (MCU), more intelligent, lower power consumption3. Power-off settings automatically memory (MCU built-in EEPROM storage unit)4. The control accuracy of 0.1 de..

Feature: Model: XH-W1705Supply voltage: DC12V/24V/AC220VTemperature control range: -26~100 Degree CelsiusControl accuracy: 0.1 Degree CelsiusHysteresis setting: 2/5/10/15Measurement input: NTC 10K/B3950L = 1meterDefault Temp Difference Setting: 2 Degree CelsiusTher..