Converter Board

>>>Manual: Click here to open..

Feature:This module is a voltage and PWM conversion module that converts PWM digital signals into 0~10V analog signals, and adjusts the output voltage by adjusting the PWM duty cycle. V-PWM can convert 0~5V~10V voltage into 0%~100% PWM output, adjust the PWM duty cycle by adjusting the voltage, the ..

Features: 1. RS422 interface, two-way communication. A B Y Z GND interface, GND can be used, super distance transmission 1000 meters.2. ESD protection with 15KV3. Increase the power of the 10 ohm current limiting overcurrent protection resistor on the board.4. TVS diode, lightning..

Feature: The board is 2OZ copper thick, the measured maximum can support up to 1600W power supply, 10 sets of graphics card 6pin output, solid capacitor filtering, suitable for a variety of server power supplies9 6P header outputs A 4P header output, 4P header for use with our 24P DC board ..

Size: 12.1*7.6mmFront pin spacing: 1.5mmReverse pin spacing: 2.3mm Package Included: 10 x SOT89/SOT223 to SIP Patch Transfer Adapter Board..

Features:  1. Compatible with 3.3V and 5.0V power supply.2. Compatible with 3.3V and 5.0V signal.3. Absolute using imported chips, industrial design, anti-interference ability, while using more effective mine design can be used in the industrial field and harsh field environments, the wo..

Description:   Fit all USB interface devices. PH2.0 anti reverse interface, to effectively prevent the line reverse. Size: 32 x 32mm Aperture: 3mm Hole spacing: 25.5mm Connection line length: 20cm   Package Included: 1 x USB Adapter 1 x Cabl..

Description: 1. The USB driver IC is CH340, stable performance, fully compatible with USB1.1,USB2.0,USB3.0 , baud rate up to 256 kbps; 2. The  RS232 bus IC is SP232,this is Industrial grade RS232 conversion IC3. USB to RS232 serial port, 3 pin pin assignment as below :   GND TX RX 4. USB to TTL seri..

Description:  The imported new original control chip PL2303HX can tell the stable brusher. Input VCCS is DC 5V. It needs to be used with mini USB data line. Set up three LED lights, D0 as power indicator, TXD as signal sending indicator, RXD as signal receiving indicator. ..

Feature:1. Can be used as a development simulation and production tool.2. Added self-checking function to the official firmware; plug and play, no power-on arrange requirements; aluminum alloy shell, laser engraving will never fade;3. Three-color status indication: self-test (red)/SPI (blue)/I2C (gr..

Feature:Function introduction: Test module based on VGA interface and PS2 interfaceTypical application: VGA, PS2 testMain resources: VGA interface, PS2 interface, control interfacePackage includes:1 x Adapter..

Description:This power Adapter board design for IBM X3650 server PSUThe total output power when the power supply is rated 1350W10 x 6pin jack, with 2 PSU connect ,you can get the 1350W typical output.Fit for S7 A721 A741.It also work with 1 PSU, half power output. The switch on the board for power O..