Other Module Board

Feature:The optical endstop is the best solution for any type of 3D printers and other CNC or 3D tools.  Documents:Datasheet:  Contact UsDimensional drawing: Contact UsPinout: Contact UsSchematic: Contact UsPackage includes:1 x Optical endstop1 x Cable..

Specification:Film material: PVCPanel material: carbon steel spray paintMounting hole: M3Suitable for NY-D02 panelPackage included:1 x Panel +Film ..

Description:In actual work, this module will be used when the need for isolation control and voltage conversion is encountered.It can realize the interface of 3.3V or 5V to control 3.6-24V voltage level. After the control terminal is turned on, the controlled terminal will also be turned on.The phot..

Features: With 4x FP solid capacitors, making graphics power supply more stable and secure.6P interface (16A power supply capacity) to strengthen the power supply, avoiding burning line due to the problem of insufficient power supply.Graphics card slot adopts original imported connector ..

Description:PDM mini Unit is a digital MEMS silicon-based microphone based on PDM (Pulse Density Modulation) signal. The microphone has high signal-to-noise ratio, high sensitivity, low power consumption, anti-radio frequency interference, smooth frequency response and other characteristics. It auto..

Description:Welding thickness: 0.2mm Nickel-plated steel belt/ 0.3mm Open nickel tapeGears: 30 Gears AdjustableDisplay: OLEDSpot Pen: 8AWGResolution:1/1024Maximum output: 1100A currentCapacity: 5000mAh / 18.5WhPower: 4.2V / 1.1KA (4.62KW)Size: 110 * 80 * 22.6mmPoint soldering pen: a pair of 28 squar..

This kind of controller has a very large instantaneous welding current, 100 to 200A, and the heat inside the mos tube is also very large! Therefore, when testing the machine, the welding energy should start from the minimum, and the welding can be guaranteed. Don't set too large! The most important ..

Overview:RC absorption circuit module used on protecting the relay or thyristor because it can avoid damage that from inductive electromotive force generated by the inductive load when on or off. Preventing electromagnetic interference and increasing the anti-jamming capability of the microcontrol..

Description:Gain: 2dBiFrequency range: 880-960 (MHz) Package included: 1 x RF ID 915MHZ Antenna..

Description:RF433T is a radio frequency (RF) transmitter, using SYN115 radio frequency transmitter IC, working frequency is 433.92MHz (using ASK modulation) commonly used by wireless controllers, built-in PCB antenna, stable signal transmission distance up to 10M, The output power reaches 10dBm. The..

Overviews: This case is compatible with Rock64 development board. Feature: Easy to install, fixs the board via 4 picese screws;Access to All ports of ROCK64, includes GPIO slot, USB port, HDMI port, DC port, SD card slot...With 4 rubber feet on the bottom of case, protec..

Functions:  Learning infrared command from remote control.Automatically launches infrared command when electricity recovery after power failure.(Such as ON/OFF key command in remote control)It is easy to install and convenient to use.Effective Distance: 10 meters (no obstacle)Appli..