Other Module Board

Description:   Onboard 8P-chip carrier, can support AT24C256 series chips; Pin power supply, on-board power indicator; on-board pull-up resistor for I2C communications required ; All pins leads out and be marked, the address input and the write-protect pin direct jumper settings; PCB board size: 36...

>>>Manual: Click here to open..

Product Specifications:* Frequency range: 1.8MHz-50MHz* Working voltage: 12V* Working current: 0.5A* Maximum withstand power: 200W* The minimum measured power of the instrument: 1W* The maximum measured power of the instrument: 200W* Instrument measurement accuracy: 5%* Meter measurement linearity: ..

Description:   AX066B001F 1CH 8-bit LVDS Length: 550mm Package included: 1 x Line..

Note:This package does not come with a shell, if you need a shell>>>ID 1918719: Click here to open..

Description:The high frequency capacitor has low internal resistance and can withstand high temperatures of 105℃.The two-sided outlet is convenient for spot welding, and it is marked in Chinese, and it is not easy to connect wrongly.Super thick red copper tube, 10AWG wire, aluminum oxide copper spo..

Description:BAVG2Socket is a transfer line terminal suitable for RS485 line construction. The conversion head integrates the 2.54-2P terminal and the DC power input interface into a 3.96-4P specification terminal. It is convenient to access the equipment using 3.96-4P interface in the M5 hardware sy..

Square wazve music download link:Description:It can light up the bulb, with high-frequency high-voltage.Power supply : 60V 3AInstructions:1. Install the discharge needle in the top nut2. Turn on the powerPackage included:1 x Tesla Coil with 60V 3A Power SupplyNote:This version without Bluetooth！..

Description:BUS SOCKET SMD 13.2 is the SMD male and female header kit that contains 10 sets 2 x 15Pin male and female headers. The spacing and number of holes are the same as the M-BUS on M5Core and M5Core2, allowing you to design your own circuit and connect it to M5Core and M5Core2.Product Feature..

Usage: 1. Connect to computer through emulator.2. Downloader Cable connects to the 10 Pin needle on Dongle.3. Supply power for Dongle through USB interface.The CC Debugger is a small programmer and debugger for the TI Low Power RF System-on-Chips. It can be used together with IAR Embe..

Features:  Hole spacing: 26mm Fixed hole: 3mm Size: 27 x 27mm Interface: 6P DuPont line, Micro USB interface. Chip: CH340 Ports: RXD, TXD, CTS, DTR 5VGND VCC  Package Included: 1 x CH340 Loader Program Downloader Module..

Description:CJMCU - 9911 high sensitivity of hall sensor technology of triaxial electronic compass.  The most suitable for navigation using cell phones and other portable devices to walk city. Function: Three axis magnetometer device for beidou application  Built-in Analog-to-digital converter..