Battery Protection Module

Description:1-Cell(1S) Version:Input voltage : DC 4.5V-5.5V(Recommend DC 5V)Charging voltage about : 1.35V-1.7VCharging current about  : 230mA-240mA2-Cell(2S) Version:Input voltage : DC 4.5V-5.5V(Recommend DC 5V)Charging voltage about : 2.7V-3.4VCharging current about :230mA-240mA3-Cell(3S) Version:..

Features: - High-accuracy voltage detection circuit- Terminal of the charger using high voltage device- Built-in three-stage over-current detection circuit (over-current 1, over-current 2, or   load short circuit)- MOS transistor can control the battery charge and discharge- Low..

Specifications: Single Cell overcharge protect voltage:  4.23 - 4.28V  Single Cell overcharge rotect recover voltage:  4.08 - 4.18  Overcharge protect delay:  0.5 - 1.5S  Single Cell over-discharge protect voltage:   2.72 - 2.88V  Single Cell over-discharge rotect recover volt..

Description: B+ connected battery positive;B1 the connect point between battery 1 and battery 2;B2 connect the point between battery2 and battery 3;B3 Connect the point between battery 3 and battery 4;B- connect to battery negative end;P- + connection charge / discharge positive..

Description:Model: DL12S (3.2V Rated LiFePO4 battery bms not for 3.7V rated Li-ION Battery bms)common Version : common port for charge/discharge separate Version : separate port for charge/dischargeWe can customize any PCB from 1S to 30S lithium batteries with different current.Highlight：For the sam..

Feature:Model NoHT-10CDisplay methodLCDRated Voltage Scope7-18VOptimizing Current0-10AQuiescent Current10mAConnection methodParallel Connect or Series ConnectMulti-module parallel connectionSupportProduct Size85*75*30mmProduct Weight160gWhat is the Battery Equalizer?Battery equalizer is used to main..

Specification:Brand: Changfa (Digital)Model: CF-64V30-AProduct name: 13S SANYUAN 48V Split-port 35A Lithium Battery Protection BoardDischarge current: 35ARated voltage: 48VCharging current (Split-port): ≤10AMain circuit conduction internal resistance: ≤15MΩCharging voltage: 54.6VShort circuit prote..

NOTE: This is 13S BMS, please consider carefully before purchasing.The picture is just for reference.Description:We can design it for various lithium batteries like LiFepo4, LiMn2O4, and Li-polymer etc.The main functions are: over charge protection, over discharge protection, over current protection..

Advantage:1. Coulomb counterBased on current to time scoring, accurate calculation of remaining battery capacity and charging capacity, etc.2. Parameter displaySupport Android mobile phone connected to Bluetooth display parameters, set and modify parameters, independent display screen display parame..

BMS is for battery use, different strings are not compatible.E.g: 13S BMS, can not be used for 10S battery, can only be used on 13S battery.10A-25A: 63*47*12mm30A: 94*58*16mm40A-60A: 94*58*16mm70A: 125*63*16mm100A-200A: 175*68*16mmDescription:Range: nominal voltage is 3.6V, 3.7V lithium battery (inc..

Specification:Brand: Changfa (Digital)Model: CF-64V30A-AProduct name: 16 series Iron lithium 48-30AV Lithium Battery Protection PanelDischarge current: 30ACharging current (same port): 30AMain circuit conduction internal resistance: ≤15MRCharging voltage: 58.4VShort circuit protection: 200USWorking ..

Specification:Brand: Changfa (Digital)Model: CF-64V30A-AProduct name: 17 series LSANYUAN 64V 30A Lithium Battery Protection Plate Discharge current: 30ACharging current (Same port): 30AMain circuit conduction internal resistance: ≤15MRCharging voltage: 71.4VShort circuit protection: 300USWorking pow..