Feature:1. Use TM1650 (compatible with AIP650) digital tube dedicated driver chip, support 8-level brightness adjustment, working voltage 3.3V~5.5V2. IIC interface, only need 2 ordinary IO to drive, do not need MCU to scan repeatedly, saving MCU resources.3. 4-digit 0.56 inch red/green common cathod..
Description:-This mini OLED is design for Raspberry Pi computers, to give you a little display.-The
PiOLED comes with a monochrome 128x32 OLED, with blue pixels. The OLED
uses only the I2C pins so you have plenty of GPIO connections available
for buttons, LEDs, sensors, etc. It's also nice and co..
Note: To protect the screen, add an iron frame to the screenInterface: IIC/I2CGND: Power Gound
VCC: 3.3V-5V
SCL: CLK clock
SDA: IIC dataFeature:Color: White LED
Resolution: 128x64
Power: 0.06W
Wide power supply range: DC 3V-5V
Temperature: -30°C to 70°C
Dimension: 29.28 x 27.1 mm (LW)
Comp..
0.96 Inch White SPI OLED Display Module 12864 LED ForFeature:OLED Driver IC: SSD1306
Resolution: 128 x 64
Visual Angle: >160°
Input Voltage: 3.3V ~ 6V
Compatible I/O Level: 3.3V, 5V
Mini Size: 2.7 x 2.8cm
Only Need 2 I/O Port to Control
Full Compatible , 51Note:If you decide to buy OLED dis..
Description:The relay module can be run on 3.3V.It can reduce the difficulty of the development with corperation with Python library which we provide.Specification: Brand Name: 01StudioPower supply:3.3VTrigger mode:Low-levelMax. load: 250V/3APackage included: 1 x Relay Module 1 x Cable..
Description:MPU6050 sensor module combine a 3-axis gyroscope and a 3-axis accelerometer on the same silicon die, together with an on board Digital Motion Processor(DMP).This module can access external magnetometers or other sensors through an auxiliary master I2C bus. It can reduce the difficulty of..