Module Board

Description:BUS Socket 13.2 is a M-BUS bus expansion header set, including 10pcs 2 x 15P headers. The spacing and the number of holes of the female row are the same as those on the M5Core, which can be used for DIY design circuit and connect it to the M5 main control.Specification:Row mother: 2 x15P..

Feature:The power supply is fully isolated industrial grade built-in power module with temperature protection, overcurrent protection and short circuit full protection, AC85 ~ 265V wide voltage input, high and low voltage isolation, DC12V1A 5V1A dual isolated output voltage, 431 regulated, output..

Features: - High-accuracy voltage detection circuit- Terminal of the charger using high voltage device- Built-in three-stage over-current detection circuit (over-current 1, over-current 2, or   load short circuit)- MOS transistor can control the battery charge and discharge- Low..

Description: 1. Support WINDOWS 98 / ME / 2000 / XP / Server 2003 / VISTA / Server 2008 / Win7 / Win8 32 Bit / 642. Support USB1.1 or USB2.0/USB3.0 for communication.3. Simulation interface, you can upgrade serial peripherals.4. Supports common MODE contact signal.5. Supports ..

Specifications: Single Cell overcharge protect voltage:  4.23 - 4.28V  Single Cell overcharge rotect recover voltage:  4.08 - 4.18  Overcharge protect delay:  0.5 - 1.5S  Single Cell over-discharge protect voltage:   2.72 - 2.88V  Single Cell over-discharge rotect recover volt..

Specifications: Support Model :18650 BatteryShell material: ABS fire, flame retardant, high temperature, color diversity and other materials for choice.Metal spring: carbon steel nickel plating by NCAA salt spray test, stainless steel spring.External: wire, welding pieces, pins, male ..

Description:   The XL6009 is a high-performance step-up (BOOST) module with 4A switching current. The module uses the second generation of high-frequency switching technology XL6009E1 as the core chip, performance far more than the first generation of technology LM2577. XL6009 step-up module cost lo..

Description: The rotary encoder is used to measure the speed and with PWM technology can achieve rapid speed devices With fixed bolt hole for easy installation Great for DIY project Specification: Model: KY-040 Working voltage: 5V Material: PCB + Brass Weight: 10g Size: 32..

Feature:1. It is suitable for driving stepper motors of 8V~35V 2A or less2. Only simple step and direction control interface3. Five different stepping modes: full, half, 1/4, 1/8 and 1/164. The adjustable potentiometer can adjust the maximum current output to obtain a higher step rate..

Specification: Input voltage range: AC50V-277V / DC70V-390V No-load power:..

Instruction: Click here to openSpecifications:Power Supply: AC110-220V Temperature Control Range: -55℃-120℃Resolution Ratio: 0.1°C(-9.9-99.9); 1°C(other range)Color of Displaying: red/blueMeasurement accuracy: ±0.1°CControl accuracy: 0.1°CSensor: NTC10K Waterproof sensorOutput: Relay Contact Capacit..

Feature: Active buzzer, no frequency signal, only need to offer signal to level can soundSuitable for button prompt, prompt warning and so on Specification: Size: 26 * 21mmVoltage: 5VPort: Digital levelPlatform: , microcontroller Package includes: 10 x Activ..