Features:1. Can resistance to high and low temperature, from -190℃ to 280℃
2. With corrosion resistance
3. Good feed tube for 3D printer 1.75mm filamentSpecifications:Length: 480mm
Diameter: 2mm*4mm(inner hole*outer diameter)
Color: Blue
Temperature: -190℃ to 280℃
Application: CR-10S PRO 3D P..
Features:
- These Cast Corner Brackets are used to connect two V-Slot Linear Rails together for a 90 degree connection.
- "Mount this corner to V-Slot Linear Rail using M5x8mm Low Profile Screws and M5 Tee Nuts."
Specifications:
Dimensions: 20mm x 20mm x 17mm
4mm Wide T-Slot..
Specifications:
Long Life: 28000h
Electronic circuit protection
Wide Application: Suitable for most 3D printer
Dimension: 40x40x10mm
Cable Length: 30cm/ 100cm
Power consumption: 1.92W
Current rating: 0.08A
Noise: 24DBA..
Features:Linear bearing ball cage, hardened coat of both ends ring.
Made of carbon chromium bearing steel, safe and reliable.
Ball in the cage loop to run a smooth ball guide surface to ensure stability even if high-speed.Specifications:Model : LM8UU
Shaft ID : 8mm
Shaft OD : 15mmPackage Inc..
Descriptions:
The TL-Smoother is an addon module for 3D printer stepper motor drivers.The board provides flyback diodes (freewheeling diodes) for the motor outputs, so that they are also protected against induction voltages in the unpowered state of the driver.
You will got smoother movement..
Features:Alumina is a high hardness compound, which is not easy to be corroded in the air.Accurate size hole position, convenient installation.The high temperature performance is stable and durable. Specification:Material: AluminumColor: Red & Gold Package included:4 x Nut4 x Spring..
Features:1. Super elastic
2. On the surface of nickel plating processing, have better corrosion resistance, and surface hardnessSpecifications:Diameter: 8mm
Length: 25mm
Material: stainless steel
Fit for: 3D Printer heated bedPackage included:50 x 8*25mm Leveling Spring..
Specifications:- Size: 52.5*52.5*7mm(Length * width * thickness )- Hole distance 44mm- Reverse diagonal center distance 44mm- The inside diameter of the middle hole is 14mm- The inner side of the inner hole can be flanged by 22.5MM
- Material: Alloy
- Quantity: 1Pcs- For: 3D Pri..