3D Printer Accessories

Package includes:Nozzle 1.75/0.4: 10pcsSilicone sleeve: 2pcsSilicone hot mattress: 5pcs (4pcs18mm+1pc16mm)Consumable filter cleaner: 1 piecePC4-01:5PCSBlue clip: 5PCS..

as shown in the picture..

Specification:Product name: E3D titanium alloy nozzleProduct material: titanium alloyProduct size: 7* 13.3MMProduct aperture: 1.75mmSize: 0.2/0.3/0.4/0.5mmProduct weight: 1.2gProduct use: suitable for 3D printers, motor couplings, ship models, car models, aircraft models, etc.Package includes:1 x E3..

Features:- Complete install tool kit - Suit for most of 3D printersPackage Included:..

For Kingroon KP5 Series..

Compatible:CR-6 SECR-6 MaxEnder-3 proEnder3-V2 3D PrinterWarm Tips:Not included the fan bracket!Package Included:1 x Extruder Hotend..

Overview:0. FFC soft cable 0.5 pitch 36pin, the direction is of the same direction1. P = bit = core = pin (number of copper)2. Cable length optional. 30cm, 70cm and 100cm.3. Spacing: the distance between the two needle center. If uncertain, measure the bus width (unit: mm)    Spacing..

Please  note:Choose the type you wanted.A = 1PCSB = 5PCSC = 10PCSD = 20PCSAssemble step:1. Put the consumables in the bag2. Seal the bag3. Put the manual air pump on the air valve to extract air4. After exhausting, remember to press it with your hand. Make the suction port flat, the sealing effect w..

Features: - Compatible with UNO, Leonardo, Mega, 101 (Intel Curie), DUE, Micro, Mini, Nano - Module supply voltage: 5v - Interface: 1 I2C / TWI two-wire data communication interface, 2 gadgeteer interfaces - I2C interface communication address: 0x20-0x27 (factory default addres..

Specifications:Applicable models: 3D printer nozzle 0.2mm / 0.3mm / 0.4mm Available models: 0.2mm / 0.3 mm / 0.4mm  (Optional, please choose the one you need) Material: Stainless steelPackage includes:1 x Nozzle-clearing drill    ,,,..

Specifications:- Type: 3010 cooloing fan- Material: Plastic- Dimensions: 30x30x10mm- Connector: 2 p (2.0) PH2.0-2P- Rated: DC: 12V- Nominal Current: 0.14 ± 10% Amp- Nominal Speed: 5500 ± 10% rpm- Air Flow: 7.9CFM- Noise: 26 ± 10% dBA- Bearing Type: Sleeve- Lifetime: 3..

Material: Aluminum/Copper platedWeight: 19gDimensions: 16x10x20mmFeatureVery shiny and smooth.Non-stick surface.High temperature resistant.Reduces the adhesion of filament to the heater block.Package Included:1 x Heat Block..