Power Supply Module

Feature:Input: DC 6V--12V (The input voltage must be higher than the output voltage by more than 1V.)Output: 5.0V (+-0.05v error), 800mA (load current cannot exceed 800ma)Specially designed two pin fixing holes, which can be directly fixed on the hole plate for expansion experiments;Inp..

Applications: Solar panel to mobile phone chargingCar charging retrofitDriving recorder power supplyHousehold power transformation Characteristic: Input voltage range: 6V-30VOutput voltage: default 5V, automatically adjust between 3-12V after triggering fast char..

Feature:This module uses the LM2596 chip, high efficiency (up to 92%), low heat, can be very easily used to above 3A current, in conjunction with the original TI op amp control output current, so the overall output is very stable. This module uses the original Sanyo low ESR filter capacitor, you c..

Description:DPS Series CNC relatively early NC products, software and hardware have been greatly improved.Operational aspects reserved V / A hot key, you can quickly set the voltage and current.Screen refresh rate also increased more than two times that is no sense of delay.Inc..

Introduction: KQ-130F is a single-row 9-pin small-volume high-performance zero-crossing carrier data transceiver module. It is a cost-effective carrier module specially designed and developed for reliable transmission of data under 220V AC, strong interference, strong attenuation, and long-dis..

Description:  PCIE, PCI dual-slot design, compatible with all desktop computers. The relay is physically insulated and does not burn the motherboard. Four-channel POWER SW design does not affect the original power button boot function, easy installation. Computer motherboard powe..

Features:The voltmeter resolution: ±0.1V The voltmeter digital display range: 0V - 45V The voltmeter input voltage range: DC 4V - 40V Output voltage: continuous adjustable (1.3V -37V) Output current: 2A ( Max 3A) Size :65 x 35mmDescription:With terminal block Over-heat protection a..

Description:Input voltage:4.5-35V Output voltage:1.5-35V(Adjustable) Output current: Rated current is 2A,maximum 3A(Additional heatsink is required)Features:Conversion Efficiency: Up to 92% (output voltage higher, the higher the efficiency) Switching Frequency: 150KHz Rectifier: Non-Synchronou..

Specification: 1. With the voltmeter shows voltage meter error ± 0.1V, the range 0-40V. (Note: To ensure the accuracy of the voltmeter, please ensure that the input voltage of 4V and above) 2. Touch the key to switch measuring input or output voltage, and has a light show which is being measu..

Description:   1, Input voltage: 3.2-35V Adjustment method: the first to connect the power supply (3.2-35V) and then use a multimeter to monitor the output voltage and adjust the potentiometer (generally rise the voltage in Clockwise, reverse to buck) 2, Output voltage: 1.25-30V continuously adjusta..

Features: Synchronous rectification scheme, wide voltage input, high current output, high efficiency. With DC plug and terminals, easy to use. With USB port, with fast-charge identification chip compatible with Andrews and iphone mobile phone.  Product parameters:   I..

Features: This is a flexible and easy-to-use LM2596, DC-DC step-down module, which can flexibly set the output voltage through a 6-position DIP switch. It also has an indicator light display. The input and output are all 4-position binding posts, which can be connected to different places as needed...