Smart Module

Manual: Click here to openMore details: Click here to openOverview:ESP8266 dual relay development board is equipped with ESP-12F WiFi module, all I/O ports are led out, and it supports DC5V/8-80V power supply. Provide Arduin development environment reference code, suitable for ESP8266 secondary deve..

If you need the 915MHz version, please click here to buy: Product ID 1545115 Description:   The 868MHz antenna needs to be in connection with the IPEX interface (if the antenna is not connected, it may damage the LoRa chip) Lithium battery charge and discharge circuit, when the battery is full..

Description:The antenna needs to be in connection with the IPEX interface (if the antenna is not connected, it may damage the LoRa chip)Lithium battery charge and discharge circuit, when the battery is full, the blue LED will stop working. When using, pay attention to the positive and negative of th..

Specification:1.Input Voltage: DC10-14V 2.Standby Current: 90dBm 6.Remote Control Distance: >100 meter(In open environment) 7.Decoding Way: MCU Software decoding 8.Can store the number of remote control:50 9.Support remote control type: Fixed code, learning code 10.Channel: 1CH 11.Multiple working..

Specfications: - Model:MX-05V- Voltage:DC5V              - Current:4MA                - Frequency:315MHz / 433MHz- Sensitivity:-105DB- Antenna:32CM single core wir..

Specifications: Working Voltage: AC220V-+10%Max Current : 10A (have better lower than 7A )Channel: 1CHWorking Frequency : 315MHZReceiver sensitivity: : -105DbWorking temperature : -10'C - +60'COutput way: Momentary. Toggle .Latched  adjusted by JumperCode type: Learning co..

Features: The receiving board of the remote controller is suitable for electric control circuits such as anti-theft alarm, remote control of electric doors and windows, signal control, industrial control, lifting equipment, etc. Relay contacts of remote control switch module output independently,..

38KHz MCU Learning Board IR Remote Control Switch Infrared Decoder for Protocol Remote Controller for Arduino - products that work with official Arduino boardsSpecification: Size: 86*40*6.0mmRemote control range: 8-10 metersBattery: 3V button lithium manganese battery ..

Features: 1. Suitable for 700-960MHz / 1710-2700MHz2. Can be used for indoor mobile phone signal, 3G Internet signal, 4G Internet signal, GPS navigation signal, GPRS IOT system signal, call system signal collection, etc., and is widely used in wireless meter reading data backhaul system...

Note: If you need more transmitter, please search 1012382 This product does not supply any instructions, please reference the description.Features:It is a learning code wireless remote control switch (receiver), the output way /working way can be changed as you like, it is easy to match the tran..

Note: If you need more transmitter, please search 1018573 This product does not supply any instructions, please reference the description.Features:It is a learning code wireless remote control switch (receiver), the output way /working way can be changed as you like, it is easy to match the tran..

Feature: Num. Parameter Parameter value 1 Product number DL-LN33 2 Chip selection CC2530 3 Working frequency 2400~2450MHz (16 channels total) 4 Communication..