Smart Module

Description: Zigbe smart module switch  (recommend) that must be used under Zigbe gateway hub connected with Zigebee protocol.1.This smart Tuya ZigBe 3.0 module is designed with ZigBe 3.0 protocol specially, compatible with Tuya ZigBe hub(also Smartthings、PH*ILI*ES H*UE ECHO PLUS supported) to reali..

Product Description:A replacement for remotes with fixed and rolling code frequency from 280 to 868 MHz Up to 4 different remotes in ONE! Every button can be programmed as a replacement for a different brand, so using only one transmitter you can control up to 4 devices from different producers .For..

Note: This item is 868mhz, T-Echo SoftRF with BME280 version.The T-Echo is a version evolved from LILYGO T-BEAM.At the beginning of the design, more consideration was to adapt to Meshtastic and SotfRF, so Bluetooth and low power consumption were considered when designing, and NRF52840 Advanced Bluet..

The T-Echo is a version evolved from LILYGO T-BEAM.At the beginning of the design, more consideration was to adapt to Meshtastic and SotfRF, so Bluetooth and low power consumption were considered when designing, and NRF52840 Advanced Bluetooth 5 was selected Thread and Zigbeemultiprotocol SoC.The LO..

Description:SRX883Pro is a superheterodyne receiver module with low latency, fast reaction and micro power consumption. It can be used with our STX series ASK transmitter module. It has high stability, anti-interference and low cost performance, and also has a super driving force, which can pass R..

Heltec LoRa Node Products Difference Table:“Heltec LoRa” product family already included follow options: LoRa spread spectrum communication (node);Battery powered;Good RF circuit design and impedance matching. Product Type① ..

T-A7608SA-H And T-A7608E-H:Both T-A7608SA-H and T-A7608E-H are equipped with ESP32 chip, which can realize WIFI and Bluetooth functions, and are equipped with SIM card slot and TF card slot.T-A7608SA-H and T-A7608E-H Compared with T-A7608SA and T-A7608E, LTE (Mbps) is optimized from 10(DL)/5(UL) to ..

Feature:Hardware Specifications ChipsetESPRESSIF-ESP32 240MHz Xtensa® dual-core 32-bit LX6 microprocessorFLASHQSPI flash 4MB / PSRAM  8MBSRAM 520 kB SRAMButtonResetUSB to TTLCH9102F Modular interfaceUART, SPI, SDIO, I2C, LED PWM, TV PWM, I2S, IRGPIO, capacitor touch sensor, ADC, DACLNA  pre-amplifie..

Feature:Demo: https://github.com/Xinyuan-LilyGO/TTGO-T-Display Hardware SpecificationsDescriptionChipsetESPRESSIF-ESP32 240MHz Xtensa® dual-core 32-bit LX6 microprocessorFLASHQSPI flash 4MB /16MB (optional)SRAM520 kB SRAMButtonResetUSB to TTLCH9102FInterfaceUART, SPI, SDIO, I2C, LED PWM, TV PWM, I2S..

Micropython Getting Started: https://www.raspberrypi.org/documentation/microcontrollers/micropython.html C/C++ Getting Started: https://www.raspberrypi.org/documentation/microcontrollers/c_sdk.html Github:https://github.com/Xinyuan-LilyGO/LILYGO-T-display-RP2040Pin Diagram:Package includes:1 X T-Dis..

T-Dongle Introduction:T-Dongle equipped with ESP32-S2 (support Wi-Fi) chip, 1.14-inch ST7789V HD LCD (supportArduino) display.Equipped with OTG Male Female Interface, Grove Connector, TF Card, WiFi 3D antenna.More information:https://github.com/Xinyuan-LilyGO/T-Dongle-ESP32S2Package includes:1 X T-D..

Github: https://github.com/Xinyuan-LilyGO/T-Internet-COM Package includes:1 x T-Internet-COM2 x M2.5X5mm screws[PICE-SIM series modules are not included by default][Without SIM / TF Card.]..