Motherboard & Development Board

Description: This is compatible R3 Mega2560 ATmega2560-16AU control board without USB cable and unsolder Pin header. Mega is an ATmega2560 as core microcontroller development board itself has 54 groups digital I / O input / output terminal (14 groups do PWM outputs), 16 sets of simu..

Product Details:Seeeduino Arduino Mega is a powerful micro-controller derived from Mega. It features ATmega2560 processor which brings a large number of I/O pins, as much as 70 digital I/O, 16 analog inputs, 14 PWM, and 4 hardware serial ports. Compared to Mega, we shrunk the volume of Arduino Mega ..

Feature:This board is completely solve the traditional 2560 board is not compatible with win7 and win8 system instability. Retains the main chip ATMEGA2560-16TW (Updated version) , replacing the usb chip-16U2, in most applications, these USB interface chips only as a serial "brush "and communicati..

Description: The Micro ATmega32U4-MU is a tiny microcontroller board based on the ATmega32U4. It has 20 digital input/output pins (7 of which can be used as PWM outputs and 12 as analog inputs), a crystal oscillator, a micro-USB connection, an ICSP header and a reset button. With a 16 MHz freq..

Features:Support for the IDE 1.0+ (OSX / Win / Linux) Power via USB or External Source - 5V or 7 -35V (automatic selection) On-board 500ma 5V Regulator Built-in USB(and serial debugging) 6 I/O Pins (2 are used for USB only if your program actively communicates over USB otherwise you can use all 6 ..

Description:Microbit expansion board: It is a function expansion board for Microbit board and supports Scratch / Python programming.It has 4LEGO Socket, through compatible with BBC Micro:bit board and LEG0, you can DIY more interesting cases.Features:1. 3.5mm audio interface2. 5 metal interfaces sea..

Feature:Powerful CPU: ARM® Cortex®-M0+ 32bit 48MHz microcontroller(SAMD21G18) with 256KB Flash,32KB SRAMFlexible compatibility: Compatible with Arduino IDEEasy project operation: Breadboard-friendlySmall size: As small as a thumb(20x17.5mm) for wearable devices and small projects.Multiple developmen..

Features: Power the MicroPython SAMD21 M0 with 6-24V or the micro USB to 5V USB. The board will automagically switch between USB and DC, DC IN in priority.SAMD21 M0  has 25 GPIO pins (22 on pin-header line and 3 on SPI header), 12 analogs in, one of analog out DAC. An SPI port, I2C port, UA..

Description:Model Number: MINI 32 V2.0 Demo code: https://github.com/LilyGO/ESP32-MINI-32-V1.3 Pin reference description: Package included: 1 x TTGO MINI 32 V2.0 ESP32 WiFi bluetooth Module 2 x Long female pins 4 x short female pins 2 x Normal pins..

Description:Raspberry Pi Pico is a convenient, flexible, and easy-to-use open source electronics prototyping platform.Positioned as a high-performance single-chip controller, it is committed to solving the deficiencies in the field of hardware control, which Raspberry Pi is not good at, and is an im..

Feature:Main chipSTM32F103RBT6 (64pin) LQFP64Chip FLASH: 128K, Chip SRAM: 20KHuman-computer interaction8 LEDs, 4 buttons, adjustable potentiometer, 2 four-position common anode digital tubes, 1 active buzzerStorageExternal expansion 16Mbit SPI FLASH (W25Q16)External expansion EEPROM 24C02, the chip ..

Specifications:Power supply: AC9-12V 3W 50HZ/60HZ(AC power must be used, dc power does not trigger)Start mode: foot or other passive normally open point(note that it must be normally open point, no source signal can be used) Trigger form: silicon controlled special imported optocouplerDisplay form: ..