Electronics

Description:1. Working voltage: DC 12V (24V Version Contact Us)2. Standby current (all relays closed) 11MA, 1 relay open 30MA, 2 relays open 49MA, 3 relays open 65MA,4 relays open 82MA,5 relays open 101MA,6 relays open 120MA, 7 relays open 138MA,8 relays open 156MA3. 1/2/4/8 photoelectric isola..

Description: Gain:32dB Power supply voltage: DC 12V (Current 35mA) with shielded enclosure Input Output Impedance: 50 Ohm Maximum output power: 10 dBm (2VPP50Ohm load) Input signal: ≤-22 DBM  (  >-22 DBM Input,the output signal has been distorted) Bandwidth: 1 MHZ ~2 GHZ (gain is different u..

>>>Manual: Contact Us<<< Features: Channel: 2-channel relay;there are 2 expansion IN ports, low level output Interface:DB9 female RS232 level,can control relay on/off/self-lock/inching by computer terminalOperating Voltage:DC 12V (r..

Features:- 50mm Radial Cooling fan,12V 2 Pin DC 0.13A.- Made of high quality PBT 30% glass line VO- Bearing is high precision, long life and low noise.- Excellent for cooling heatsinks on hot ends, prints, or other cooling needsSpecifications:Material: PBT 30% glass line VOModel: 5015Voltage: DC 12V..

Features:1. DC8-60V operating voltage range (it means that the control panel can work in this voltage range; the controller power supply and fan are together in actual work; it must be powered up in accordance with fan power supply requirements, otherwise it will damage the fan).2. ..

Feature:With micro single-chip system, this speed control can achieve simple system programming, which can suit better high-speed high-power brushless motors. It has several functions:1. Safety Startup: To avoid any injury, the motor will not start up immediately if the potentiometer of speed contro..

Main Technical Indicators: 1. Working Voltage: DC12V2. Static Working Current: ≤ 6mA3. Working Temperature: -40°C 80°C4. Receive Sensitivity: ≥-105dBm5. Working Frequency: 433MHz6. Output voltage: AC, DC optional7. Output current: ≤ 3A Receive Terminal Descripti..

Description : DC 12V 8000mAh Super Rechargeable Portable Lithium - ion Battery Pack Features :   This Rechargeable battery is a 12V 8000mah Li - ion Battery and it is specially designed for powering the system device which use 12V DC power. You can use this battery to power ou..

Desription:TDA7850 is a high-quality Hi-Fi car audio amplifier IC, using a single power supply 12V - 14.4V supply, MOSFET amplifier output, 4 x 50W HiFi amplifier, low distortion, low noise, anti-interference ability, with output short circuit and temperature protection in particular aspects of pe..

Feature:Voltage: DC12VPower waste: Below 10maDC load: DC12V 10A (Resistive load)Size: 40*29*19mm(L*W*H)Weigth: 16gPackage includes:1 x Recovery Protection Module..

Parameters:​Working voltage: DC 12V (Range DC 10-15V) ​Working current: Quiescent current 4MA, relay pull-in current 36MA ​Trigger control port: ACC port, high level trigger (DC 5-24V). ​Working temperature: -40℃ to 80℃; ​Dimensions: 45x29x15mm (board only), 45x29x15mm (with case) ​Weight: 16g (boar..

Main Features:● High quality● Widely used● Made of high quality materials, more durable● Solid and durable, long service life● Built-in over voltage, over current, and short circuit protectionSpecificationMaterial: Plastic Output Type: DCInput Voltage: AC 110～220V Output Voltage: DC 12V Max Load Cur..