Electronics

Description: Diameter: 16mmAmbient temperature: -50 ~ +70 CRelative humidity: up to 98% at +40 CAtmospheric pressure: up to 4,4 kpa Vibration: vibration frequency 10 ~ 100Hz, acceleration 100m/s2 Impact: Frequency of 60 to 80 beats/min, acceleration of 250m/s2 Centrifu..

Overall:Super Hardened Steel Nozzle for MK8. Long Service Life and High Toughness. Compatible with most High temperature Printer in Market.Specifications:- Material: Hardened Steel - Model: MK8 - Size: 1.75mm, 0.2/0.3/0.4/0.5/0.6/0.8/1.0mm - Thread: M6 - Hardness: 62Package Included:3Pcs ..

>>>Instructions: Contact Us<<<Feature:Bluetooth V2.0+EDRBluetooth Class 2Built-in PCB RF antennaBuilt-in 8Mbit FlashSupport SPI programming interfaceSupport UART, USB, SPI, PCM and other interfacesSupport master and slave ..

Description:HC-05 could be setted to master or slave by user. HC-06 can only be master or slave which could be customized.Wiring(only need 4 wires): RX to RXD / TX to TXD / GND to GND / 3.6V to 6VPower: 3.3VNote: This module does not suitable for IOS system. Package included: ..

Notice:Screen Protector only,smart watch do not include...

Features:LCD driver board and raspberry pi is connected with HDMI digital video interface, taking the high-definition signal chain, together with digital LCD screen displays the effect is very clear.Specifications:Cable length: 25 cm With plug length: about 30 cmNote:For HDMI digital LCD d..

Specification:Wiichuck is a board for Wii-Nunchuck. Use this shield to achieve communication between nunchuck with for without broking the controller for Wii Nunchuck. It is grate for DIY projects. Dimensions: 1.02 in x 0.47 in x 0.28 in (2.6 cm x 1.2 cm x 0.7 cm)   Package includes: ..

Description:TheNextion IO Adapter is made specially to work with Nextion Enhanced HMI Display Series which covers standard 2.4", 2.8", 3.2", 3.5", 4.3", 5.0", 7.0". The small board pins out GPIOs ofNextion Enhanced display to 2.54 inch headers, which allow users to access the GPIOs more convenient..

Description:   Model: JDY-10 bluetooth 4.0 slave module Kernel: M0 Communication interface: serial port Working voltage: 1.9-3.6V Communication distance: 100 meters Working current: 90ua Suspen mode: 14 uA Module is: bluetooth 4.0 slave JDY-10 transparent transmission module is based on bluetooth 4...

Product introduction:The JDY-17 transmission module is based on the bluetooth 4.2 protocol standard, the working band is 2. 4GHZ range, the modulation mode is GFSK,  the maximum transmission power is Odb, the maximum launch distance is 60 meters. The import original chip is designed to support the..

JDY-22 sleep pattern description: Sleep pattern Instructions Functional description Start wake-up AT+STARTEN1 Mode 1: wake up call, users need sleep can be controlled by AT+SLEEP command, wake up can be awakened by PWRC pin low level...

Feature: joystick joysticks standard interface module electronic building blocks and 2.54mm pin interface leads.Phillips is a two-way rocker 10K resistor, with the joystick in a different direction, tap the resistance vary. This module uses a 5V supply, the original state X, Y rea..