Module Board

Note: The first use of Smart BMS requires charging activation before it can be used. For the operation steps, please refer to "Connect and Activate Video" in the following document.Attention:1. Customer need to identify the battery's series, then choose the same series BMS. Such as your battery is 2..

Note: The first use of Smart BMS requires charging activation before it can be used. For the operation steps, please refer to "Connect and Activate Video" in the following document. Attention:1. Customer need to identify the battery's series, then choose the same series BMS. Such as your batter..

Note: The first use of Smart BMS requires charging activation before it can be used. For the operation steps, please refer to "Connect and Activate Video" in the following document. Attention:1. Customer need to identify the battery's series, then choose the same series BMS. Such as your batter..

Attention:1. Customer need to identify the battery's series, then choose the same series BMS. Such as your battery is 24S, you must choose 24S BMS, can not choose 20 or other one. The number of  series of BMS is  fixed ,not adjustable once the BMS is shipped out .2. All accessories and BMS are the l..

Description:Daly 20S 72V Li-ion BMS 80A 100A 120A 150A 200A Big Current for 18650 Lithium Ion Battery Pack for lithium batteryModel: DL20S (3.7V rated Li-ION Battery not for 3.2V Rated LiFePO4)Common Version: common port for charge/discharge Separate Version: separate port for charge/dischargeWe can..

Note：300A/400A/500A BMS with Cooling fan, others are not included.Description:Model: DL4S (3.2V rated LiFePO4 Battery not for 3.7V Rated Li-ion Battery )common Version : common port for charge/discharge separate Version : separate port for charge/dischargeWe can customize any PCB from 1S t..

Note: The first use of Smart BMS requires charging activation before it can be used. For the operation steps, please refer to "Connect and Activate Video" in the following document.Attention:1. Customer need to identify the battery's series, then choose the same series BMS. Such as your battery is 2..

Description:It can light up the bulb, with high-frequency high-voltage.Power supply : 60V 3AInstructions:1. Install the discharge needle in the top nut2. Turn on the powerPackage included:1 x Tesla Coil with 60V 3A Power SupplyNote:This version without Bluetooth！..

Description:   This is a test fixture dedicated to module testing and bootloader burning. It is suitable for modules and boards without soldering pin headers and can be used to upload bootloader and Arduino sketch to Arduino Pro Mini / OPEN-SMART Mini ATmega8 without soldering pin headers. ..

Feature:Relays are one of the most commonly used components for setting the smart home when we are doing the Internet of Things.For wireless control, we specially designed this relay module. The relay module is equipped with an ESP8266-01 Wifi module. It can be connected to the wireless network, and..

Description:This module is compatible with various MCU control boards, such as MCU. Module contains 2 Kind of interface, you choose. One is the anti-reverse white terminal with a pitch of 2.54mm, At this time, we can stack a sensor expansion board on the microcontroller. Module and self-contained wi..

Description: Number of channels: 50 channels GPS L1 C/A codeFrequency: L1, 1575.42MHzSupport for SBAS: WAAS, EGNOS, MSASMaximum update rate: 5HZAccuracy: Positioning: 2.5 meters               SBAS: 2 metersCold start: 27 secondsWarm start: 3 secondsHot start: 1..