Features: - DC5-48V automatic identification- When the DC terminal has power, it is connected to the battery to charge- The charging parameters have nothing to do with this module, depending on the DC terminal, battery, and load.- Product load: 10A- Product size: 61mm*29mm Pa..
Description:
Working voltage: DC 6-24V
Working current: 60-70MA
Standby current: 1UA
Load current : AC 250V/10A, DC 30V/10A
Trigger mode: Low pulse trigger
Size: 48mm * 16mm * 18.5mm (L * W * H), Very small size
Weight: 14.3 g USE 1:By default, t..
Feature:This is 1 channel Relay module, can able to control various appliances, and other equipment with a current not more 10A (250VAC/60VDC).It can be controlled directly by microcontroller: Raspberry, Arduino, AVR, PIC, DSP, ARM or TTL logic.For control of module need power 5V and logic..
Product Description: 1. AC voltage 250V, AC current 10A, DC voltage 30V, DC current 10A;2. It adopts 8550 triode drive and has strong driving ability;3. Operating voltage 5V, Vcc pin 5v input4. With fixing bolt holes for easy installation5. Board size: 4.3 × 4.4 (cm)6. Pow..
Descripition:1. The module uses genuine high quality 30A relay, normally open interface maximum load: AC 250V / 30A, DC 30V / 30A;2. The use of SMD optocoupler isolation, strong drive capability, stable performance; trigger current 5mA;3. The module voltage 5V;4. The module can be set by jumper high..
Description: 1. Working voltage: DC 12V 2. Standby current (All relays closed) 13MA, 1 relay open 41MA, 2 relays open 69MA, 3 relays open 95MA,4 relays open 122MA,5 relays open 149MA, 6 relays open 174MA, 7 relays open 198MA, 8 relays open 226MA 3. Communication interface: RS485 interface / ..
There are 4 options for you to choose, please click the picture to take a order. (Please make sure the picture box is selected, prices vary widely, so as not to cause unnecessary misunderstanding.):Description:SR-201 Series Iot module:1. Industrial-grade STC MCU +ENC28J60+ stable firmware supports 6..
Features: - The product delay time can be set by yourself, and can be set by the button. After setting, it will count down according to the set value after the next power-on.- The product is accurate delay, 0.01% error per second. This product has three delay versions. One version has a del..