Raspberry Pi & Orange Pi

GrovePi+ is add-on board with 15 Grove 4-pin interfaces that brings Grove sensors to the Raspberry Pi. It is the newest version compatible with Raspberry Pi model B/B+/A+/2/3 perfectly.GrovePi+ is an easy-to-use and modular system for hardware hacking with the Raspberry Pi, no need for soldering or ..

Description:This is a HAT board, which is specially customized for Raspberry Pi Pico.It mainly solves the problem that the Raspberry Pi Pico silk screen is covered, and provides pin header pins, which is convenient for users to build their own DIY circuits. At the same time, it can support other Ras..

Notes: Due to the different production batch, some of the item will be 1.5m version. If you received this one, you may contact us to get 3 points as compensation. Thank you for your understanding.Feature:LCD driver board and raspberry pi is connected with HDMI digital video interface, taking the..

Description:Board model : H2C-RPI-B01HDMI interface to CSI-2 interfaceChip: TC358743XBGSupport TK1 full-featured expansion boardSupport Raspberry Pi 3B 3B+ and ZERO (linux kernel version to 4.0 or above)Limited by the performance of Raspberry itself, up to 1080p@25Physical size: 65x30 mm, fixed hole..

Description:Two choices of heatsinks. The colorful set is 1 copper sheet and 2 aluminum sheets. The silver set is 3 aluminum sheets. They are designed for Raspberry Pi 4B for heat dissipation.Package includes:3 x HeatsinkDetails picture:..

Specifications:Resolution: 32 BitsNumber of input channels: 10Sampling rate (Max): 38.4 kSPSPGA multiple (Max): 32Interface type: SPIArchitecture: Deltea-SignaInput Type: Differential, Single-EndedReference Voltage: Internal, ExternalInput voltage range (Max): 2.5V, 5VInput voltage range (Min): -2.5..

Introductions:   Raspberry Pi camera V2 module (without driver board), 8 megapixels, 160 degree field of view, compatible with Raspberry Pi V2 camera onboard interface.If you are using the Raspberry Pi camera V2 version, and you are not satisfied with the angle of view of its module, you can c..

Specification:Photosensitive Chip: IMX519CMOS Size: 1/2.534 InchPixels: 16 Million (4656×3496)Aperture: F1.79Focal Length: 4.28mmDiagonal Field Of View: 78.5Distortion:..

Package includes:1 x Case onlyOR1 x Case+fanOR1 x Case+single camera bracketOR1 x Case+dual camera bracketDetails picture:..

Description: RPI-RGB-LED-Matrix is base on 74HC595 chip and it's an 8*8 dot matrix module that can be drived by board, Raspberry Pi and even STM32 or STC89C serials development board. It communicates with your development board or your chip by SPI protocol, it's very easy to setup and use. You..

Electrical characteristics:- Input 5V through the micro USB port, input 3.3 to 5V through the pin- Output - 3.3V, optional input RTC voltage- Power consumption - 54mA (idle) when using Linux, 250mA with display- Storage temperature: -40~125°C; Operation: -20 to 70°C- Sipeed Lichee Nano with Flash Li..

Feature:Frequency Range:868/915 MHzSensitivity up to -148dBm @LoraReceive power consumption < 7 mAMaximum output power: 33dBm（2w）@6VData transfer rate:0.018-62.5 KbpsPacket engine up to 256 bytes with FIFO and CRCModulation mode：Lora TM、（G）FSKPins:VCC: Power SupplyGND: Power GroundNC: HangingNRESET:..