Display Screen

File download: Click to openFeature:Size: 0.95 inch Resolution: 96*64 Drive IC: SSD1331 Color: 65536 color Interface: SPI interface PIN NO.: 7Pin Voltage: 3.3V - 5VPin description:GND: Power ground VCC: 2.8-5.5V power supply D0: CLK clock D1: MOSI data RST: Reset DC: Data / command CS: Chip-..

Note: To protect the screen, add an iron frame to the screenInterface: IIC/I2CGND: Power Gound VCC: 3.3V-5V SCL: CLK clock SDA: IIC dataFeature:Color: White LED Resolution: 128x64 Power: 0.06W Wide power supply range: DC 3V-5V Temperature: -30°C to 70°C Dimension: 29.28 x 27.1 mm (LW) Comp..

>>>More details: Click here to open..

0.96 Inch White SPI OLED Display Module 12864 LED ForFeature:OLED Driver IC: SSD1306 Resolution: 128 x 64 Visual Angle: >160° Input Voltage: 3.3V ~ 6V Compatible I/O Level: 3.3V, 5V Mini Size: 2.7 x 2.8cm Only Need 2 I/O Port to Control Full Compatible , 51Note:If you decide to buy OLED dis..

Feature: Display Size  1.3 inch Material  HD IPS color screen, the color is more vivid than ordinary TFT LCD Resolution  240*240 display, the  direction can be adjusted, horizontal and vertical Control chip ST77..

More document click to download:  TFT LCD Display Specifications: 1.44 Inch  With PCB backplaneResolution: 128*128Driver: ST7735Only 4 IO drivers are required 1.8 Inch  With PCB backplaneResolution: 128*160Driver: ST7735Minimum 4 IO drivers requiredSupport a ..

Feature:Working voltage: DC 5VWorking current: 150mAMaximum power: 0.75WDisplay color: black and whiteDisplay size: 1.54 inch/2.13 inchDisplay resolution: 200*200/250*122Interface type: 8pin header with 2.54mm pitchOperating temperature range: -20°C to +60°CPositioning hole size: diameter 3mmHeight:..

Feature:Driver chip: SSD1309 driverSupport interface: 7-pin SPI/4-pin IICResolution 128X64Display size: 1.54 inchesDisplay Color: White/Blue/YellowModule size: 42.4x38 (mm)Display area: 35.052X17.516 (mm)Pixel pitch: 0.274X0.274 (mm)Pixel size: 0.254X0.254 (mm)Number of pins: 5PINQ.54 pitch single r..

Features: - Module with regulator IC supports 3.2V/5V power supply- With SD card holder, you can do experiments like digital photo frame- The module reserves the Nokia3310/5110 interface, supports the 1602 interface, and plugs in and out!- IO for streamlined wiring- LCD resolu..

Description:   The 1.8 Inch LCD module uses ST7735 driver chip to drive 128*160 lattice with a resolution of 128*160. 260,000 true color display. Pixels are arranged vertically. Can display Chinese characters ASCII, patterns, etc. High contrast and large visual angle. I2C serial ..

Specifications: Lattice: 128 x 64 DotsLCD mode: FSTN, negative, full transparency, black filmViewing Direction: 6 o'clockDrive Mode: 1/64 Duty, 1/9 BiasLCM Working Voltage (VDD): 3.3-5.0VLCD Drive Voltage VLCD (VOP): 9.0V Operating Temperature: -10°C~+60°CStorage Temperature: -20°C~+70°CConnection M..

If you need the yellow backlight, please buy Product ID: 978155Description:LCD display module with blue backlight Wide viewing angle and high contrast Built-in industry standard HD44780 equivalent LCD controller Commonly used in: copiers, fax machines, industrial test equipment, networking equip..

Feature:Driver chip SSD1309Support interface IIC/SPIResolution 128×64Display size 2.42 inchesDisplay color: white/blue/yellow/green (optional)Module size 71×43.5 (mm)Glass size 60.5×37.00× (mm)Display area 55.02×27.49 (mm)Drive voltage 3.3-5VNumber of pins 7PINViewing angle >160°Working temperature ..

File download: http://files.banggood.com/2017/12/2.8-spi-9341.zip Specifications: Type: Touch PanelScreen: 2.8" SPI SerialDisplay area: 46(W) X 65(H)mmSize: 86 x 50 mmDriver element: a-Si TFT active matrixPixel arrangement: RGB vertical stripeDriver IC: ILI9341Backlight..

Description: No additional modules, this kit can achieve rich projects such as character display, image reading and display, touch sketchpad, temperature measurement, and display.The kit includes a UNO R3 board which is 100% compatible with the UNO R3 program, expansion shields, IDE.The ..

Feature:2.8 inch LCD TFT display Bright, 4 white-LED backlight Colorful, 18-bit 262,000 different shades 4-wire resistive touchscreen 240 x 320 pixels with individual pixel control No wiring, no soldering. Simply plug it in and load library On-board 3.3V 300mA LDO regulator 5V compatible, use with..

Overview：Nextion is a Human Machine Interface （HMI） solution combining an onboard processor and memory touch display with Nextion Editor software for HMI GUI project development. Using the NEXTION Editor software, you can quickly develop the HMI GUI by drag-and-drop components (graphics, text, butto..

2Pcs MAX7219 Dot Matrix MCU LED Display Control Module Kit For With Dupont Cable Specifications: A single module can drive an 8 x 8 common cathode lattice Operating voltage: 5V Size: 5 x 3.2 x 1.5 cm (L x W x H) LED color: red With four screws hole, aperture 3mm With input and output inte..

Specifications:Product Type: Computer Secondary ScreenAppearance size: 55×85mmDisplay area: 49×74mmResolution: 320×480Thickness: 8mmViewing angle: IPS full viewing angleInterface: USB Type-c interfaceFrame material: Black metalFeatures:1. One-click operation, visual theme editing, one-click backgrou..

Reference Manual:https://github.com/SHWotever/SimHub/wiki/Dashstudio---USB-Displays Frequently Asked Questions:1. Is this small LCD monitor compatible with the 2.4-inch AX206 photo frame?Answer:The use of aida64 under Windows is completely compatible, and the Lcd4Linux software package (supporting 3..

More Details:https://github.com/SHWotever/SimHub/wiki/DashstudioFAQ: 1.Is this small LCD monitor compatible with the 2.4-inch AX206 photo frame?A: The use of aida64 under Windows is completely compatible, and the Lcd4Linux software package (supporting 32-bit and 64-bit) that needs to be recompiled b..

3.5 Inch IPS TYPE-C Secondary Screen CPU GPU RAM HDD Monitoring USB Display Freely AIDA64 for Mini ITX Case Support Raspberry Pi With RGB Breathing LightPlease note that only applies to windows system!Download link:3.5 inch secondary screen driver (English):https://lgb123-1253504678.cos.ap-beijing.m..

3.5 Inch IPS TYPE-C Secondary Screen CPU GPU RAM HDD Monitoring USB Display Freely AIDA64 for Mini ITX Case Support Raspberry Pi With RGB Breathing Light Optional AccessoriesDownload link:3.5 inch secondary screen driver (English):https://lgb123-1253504678.cos.ap-beijing.myqcloud.com/35inchENG.rarTe..

3.5 Inch IPS TYPE-C Secondary Screen V2 Version CPU GPU RAM HDD Monitoring USB Display Freely AIDA64 for Mini ITX Case Support Raspberry Pi With RGB Breathing Light GeekStyle APPPlease note that only applies to windows system on now! Linux and Apple systems are being tested and available soon. Later..

Specifications:Product Type: Computer Secondary ScreenAppearance size: 55×85mmDisplay area: 49×74mmResolution: 320×480Thickness: 8mmViewing angle: IPS full viewing angleInterface: USB Type-c interfaceFrame material: White metalFeatures:1. One-click operation, visual theme editing, one-click backgrou..

Description: The 2004A character LCD module is designed to display letters, numbers, symbols, dot matrix. It can display 4 lines of 20 characters. Support 4-bit and 8-bit data transfer mode. Offers 5x7 matrix + cursor display mode. Providing display data buffer DDRAM, character generator CGROM an..

5.0 Inch IPS TYPE-C Secondary Screen CPU GPU RAM HDD Monitoring USB Display Freely AIDA64 for Mini ITX Case Support Raspberry Pi With RGB Breathing LightFeatures:- No additional power supply is required, and no HDMI is required. Just need a USB data cable- 5" display with multiple themes- Support ho..

5.0 Inch IPS TYPE-C Secondary Screen Kit Black CPU GPU RAM HDD Monitoring USB Display Freely AIDA64 for Mini ITX Case Support Raspberry Pi With RGB Breathing LightFeatures:- No additional power supply is required, and no HDMI is required. Just need a USB data cable- 5" display with multiple themes- ..

Description:The 2004A character LCD module is designed to display letters, numbers, symbols, dot matrix. It can display 4 lines of 20 characters. Support 4-bit and 8-bit data transfer mode. Offers 5x7 matrix + cursor display mode. Providing display data buffer DDRAM, character generator CGROM and ..

Description: The 2004A character LCD module is designed to display letters, numbers, symbols, dot matrix. It can display 4 lines of 20 characters. Support 4-bit and 8-bit data transfer mode. Offers 5x7 matrix + cursor display mode. Providing display data buffer DDRAM, character generator CGROM an..

Specifications:Model: LR79Size: 7.9inch TFT-LCDLCD Type: IPSResolution: 400*1280Touch Function: NoDot Pitch: 0.1485(H)x0.1485(V)Signal Interface: MIPIRefresh Rate: 60HzViewing Direction: FreeView Angle: 170°Full View AngleSize Ratio: 5:16Response Time: 40ms(Typ.)(Tr+Tf)Contrast Ratio: 900:1Brightnes..

#1  7inch#2   8.8inchInstallation and setup tutorial:https://www.bilibili.com/video/BV1yQ4y1P7C5/Make and modify template tutorial：https://www.bilibili.com/video/BV1bt4y1y7hX/Product:You can think of it as just a small display (it is)Can be used as a live broadcast secondary screen to watch the barr..

Description:- 7inch standard display, 1024 × 600 Hardware resolution, Up to 1920x1080 Software configuration resolution.- Capacitive touch screen, maximum support 5 point touch.- Support backlight control alone, the backlight can be turned off to save power.- Support Raspberry Pi, BB Black, Banana P..

Features: Using the LED dedicated constant current control chip, basically only occupy the Raspberry Pi SPI interface (3 IO + 2 enable) to control 64 LED lights - Support SPI interface B/B+ involved in Raspberry Pi- Driver chip: MAX 7219- Dot matrix type: 8x8 common negative re..

Note: LCD displays don't include in BMS , if you need them , need to buy seperateply ~>>>JK BMS: Click here to open..

Please note that only applies to windows system!Download link:3.5 inch secondary screen driver (English):https://lgb123-1253504678.cos.ap-beijing.myqcloud.com/35inchENG.rartemplate:https://lgb123-1253504678.cos.ap-beijing.myqcloud.com/Wall.rarFeatures:- No additional power supply is required, and no..

Feature:ESP32-C3 is a low-cost microcontroller from Espressif that supports 2.4 GHz Wi-Fi and Bluetooth® Low Energy ( Bluetooth 5 (LE)).Use RISC V as the core.There's a minimum number of pins on this chip, it's specifically designed to be low cost and for simpler projects than ESP32-Sx or ESP32 clas..

Description: The LCD12864 Shield is a graphic LCD, joystick, buzzer and handy I/O pins for Arduino compatible microcontrollers.This shield features a 128x64 pixel graphic LCD display with backlight. The display can be used to output text or graphics. The operations is simplified by using th..

Description: Keypad Shield Blue Backlight For Robot LCD 1602 Board Brand new and high quality. This is a basic 16 character by 2 line black-on-green display. Utilizes the extremely common HD44780 parallel interface chipset. Interface code is freely available. Blue Backlight with white wor..

Specifications: A single module can drive an 8 x 8 common cathode lattice Operating voltage: 5V Size: 5 x 3.2 x 1.5 cm (L x W x H) LED color: red With four screws hole, aperture 3mm With input and output interfaces, supports multiple modules cascade Wiring instructions: 1. The module l..

MAX7219 Microcontroller 4-in-1 Display Dot Matrix Module For Specifications: A single module can drive a 8x8 dot matrix common cathode Working voltage: 5V Module size: 12.8 x 3.2 x 1.3 cm (L*W*H) With 64 fixing screw holes, hole diameter: 3mm Module with input and output interfaces, suppo..

Please note that only applies to windows system!Download link:3.5 inch secondary screen driver (English):https://lgb123-1253504678.cos.ap-beijing.myqcloud.com/35inchENG.rarTemplate:https://lgb123-1253504678.cos.ap-beijing.myqcloud.com/Wall.rarFeatures：- Only a USB type-c cable to make it work, don't..

Description:   Nextion is a Seamless Human Machine Interface (HMI) solution that provides a control and visualisation interface between a human and a process, machine, application or appliance. It is the best solution to replace the traditional LCD and LED Nixie tube. Nextion includes hardware part ..

How it display: http://files.banggood.com/2017/09/16.mp4   Dimensions:    Outer diameter: 68mm Thickness: 6.7mm / 0.3" Weight: 3.03g   Package includes:   1 x Ring..

Introduction:RP2040-0.42LCD is a high-performance Development board , Integrated 0.42 "LCD (70×40 resolution).with flexible digital interfaces. It incorporates Raspberry Pi's RP2040 microcontroller chip.The RP2040 features a dual-core Arm Cortex-M0+ processor clocked at 133MHz with 264KB internal SR..

Introduction:RP2040-1.14LCD is a high-performance Development board , Integrated 1.14 "LCD (240×135 resolution, IPS screen, 65K RGB colors). with flexible digital interfaces. It incorporates Raspberry Pi's RP2040 microcontroller chip. The RP2040 features a dual-core ArmCortex-M0+ processor clocked a..

More details: Click here to open Update: There is no download chip after the update, it needs to be used with a downloader. Description:   The 433MHz antenna must be used in conjunction with the IPEX interface (if the antenna is not connected, it may damage the LoRa chip) Lithium batte..

Link: https://github.com/Xinyuan-LilyGO/T-QTPackage includes:1 x Screen..

Three type to choose:There are three options, please check the name and picture to confirm the style you need before placing the order, so as not to cause misunderstanding.T-display e-paper:It is the "brother version" from the T-display TFT version based on the size structure of the TFT versionChang..

Micropython Getting Started: https://www.raspberrypi.org/documentation/microcontrollers/micropython.html C/C++ Getting Started: https://www.raspberrypi.org/documentation/microcontrollers/c_sdk.html Github:https://github.com/Xinyuan-LilyGO/LILYGO-T-display-RP2040Pin Diagram:Package includes:1 X T-Dis..

More Information:https://github.com/Xinyuan-LilyGO/TTGO-T4-TestCodePackage includes:1 X T4 V1.3 (2.2inch or 2.4inch)1 X Power Cable(Jst 2pin 1.25mm)1 X Line..

GitHub: https://github.com/Xinyuan-LilyGO/LilyGo-EPD47 3D printed shell file: https://github.com/Xinyuan-LilyGO/LilyGo-EPD47/tree/master/3D_fileFeature:LILYGO T5 4.7-inch E-Paper is another version of the T5 series of electronic ink screens.The T5 series of ink screen versions include 1.02, 1.54, 2...

Description:T5 4.7 Inch E-paper V2.3 is a new E-paper screen from LILYGO. It is equipped with ESP32-S3 and supports TF card.Product Specifications:- MCU: ESP32-S3-WROOM-1-N16R8- Communication Protocol: UART, SPI, 12C, CAN, 125, SDIO- Wireless Protocol: Wi-Fi: 802.11 b/g/n   blutooth: V5.0+ BLE- Boar..

Overview:This is an E-paper display module, with embedded controller, communicating via SPI interface, supports black, and white color display.Due to the advantages like ultra low power consumption, wide viewing angle, clear display without electricity, it is an ideal choice for applications such as..

>>>More details: Click here to open..

Overview:   Due to the advantages like ultra low power consumption, wide viewing angle, clear display without electricity, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.   Features:   - No backlight, keeps displaying last content for a long time even wh..

UNO R3 ATmega328P Board: Description:UNO R3 board is 100% compatible with original , now it has perfect quality and performance . is an open-source physical computing platform based on a simple i/o board and a development environment that implements theProcessing/Wiring language. can be used to de..

White 5.0 Inch IPS TYPE-C Secondary Screen Kit CPU GPU RAM HDD Monitoring USB Display Freely AIDA64 for Mini ITX Case Support Raspberry Pi With RGB Breathing LightFeatures:- No additional power supply is required, and no HDMI is required. Just need a USB data cable- 5" display with multiple themes- ..