Attention:1. Customer need to identify the battery's series, then choose the same series BMS. Such as your battery is 24S, you must choose 24S BMS, can not choose 20 or other one. The number of series of BMS is fixed ,not adjustable once the BMS is shipped out .2. All accessories and BMS are the l..
Features: - High-accuracy voltage detection circuit- Terminal of the charger using high voltage device- Built-in three-stage over-current detection circuit (over-current 1, over-current 2, or load short circuit)- MOS transistor can control the battery charge and discharge- Low..
Features: 1) high-accuracy voltage detection circuit;2) terminal of the charger using high voltage device;3) Built-in three-stage over-current detection circuit (over-current 1, over-current 2, or load short circuit);4) MOS transistor can control the battery charge and discharge;
..
Description: B+ connected battery positive;B1 the connect point between battery 1 and battery 2;B2 connect the point between battery2 and battery 3;B3 Connect the point between battery 3 and battery 4;B- connect to battery negative end;P- + connection charge / discharge positive..
Description:Application: Nominal voltage of 3.6V, 3.7V lithium battery (including 18650.26650, polymer lithium battery)Continuous discharge current (upper limit): 40A (if the cooling environment is not good, please reduce the load current use)Continuous charge current (upper limit): 20ASuitable for ..
Description:3 strings (for 3 18650 batteries or polymer lithium batteries in series combination)10.8V (rated voltage of polymer battery)11.1V (18650 or 3.7V lithium battery rated voltage)12.6V (Voltage after the lithium battery is fully charged)Discharge 10A (refers to the maximum discharge current ..