Stock: In Stock
Model: ST230046091
Description:Used for 3D printer (like SV01, Ender-3 X/Y/Z axis or CR-10 Series Z axis), machinery and equipment.1.8 degree step angle, 0.4N.M holding torque.Lower noise, strong torque, stable property and high accuracy.Specifications:Item name: RepRap 42 Stepper MotorItem number: 42-34Step angle: 1...
$11.99
Ex Tax:$11.99
Stock: In Stock
Model: ST230045824
Description:
Compared to the TMC2100 stepper motor driver module, TMC2208 driver module is with lower heat. The heat of TMC2208 in 0.8A with the equivalent effect of the TMC2100 heat in 0.5A , can be used interchangeably with the TMC2100.
Drive current algorithm and regulation:
1. Verf..
$11.90
Ex Tax:$11.90
Stock: In Stock
Model: ST230044577
Features:
Diameter: 8MM
Pitch: 2MM
Lead: 8MM
Nuts turn a circle: 8MM
Material: Engineering Plastics(POM)
Installation: Internal thread connection
Package Included:
1 x Trapezoidal Screw Nut Block..
$5.99
Ex Tax:$5.99
Stock: In Stock
Model: ST230046088
Specifications:
Material: Titanium Alloy
Working Temperature: 260°C
Outer thread: M6
Suitable for 1.75mm Filament
Application: 3D printer CR-10
Package Included:
1x TC4 Nozzle Throat
..
$5.59
Ex Tax:$5.59
Stock: In Stock
Model: ST230046873
Specifications:1 The appearance is more shiny2 thread precision improvement2 The inner wall of the tube is smoother (reducing the chance of filament clogging)3 The interface is smoother and more precise (can effectively prevent the filament from leaking)Feature:Material: Titanium AlloyStandard: V6Ho..
$4.89
Ex Tax:$4.89
Stock: In Stock
Model: ST230036932
HighlightsSelf-developed Clog DetectionPauses printing and returns to standby when a clogged nozzle is detected. After unclogging the nozzle, continue the printing process to complete the model printing. Avoid failures caused by nozzle clogging.Full Silent Printing Noise Lower than 45dbEquipped with..
$299.00
Ex Tax:$299.00
Stock: In Stock
Model: ST230046262
Specification:12V for CR10:with the Aviation ConnectorSuitable for: CR-10, CR-10SNozzle Size: 0.4mmPackage Includes: 1 x Titan Extruder1 x 42-34 Stepper Motor1 x Hotend Kit(the mk8 head)1 x Stepper Motor Wire3 x V-Sl0t Wheel1 x Fixed Backplane1 x 4010 Fan1 x 5010 Turbo Fan24V for Ender3:with the T..
$43.49
Ex Tax:$43.49
Stock: In Stock
Model: ST230047004
Type A = V6 Remote All Metal Type B = Ender-3/CR-10Titanium Alloy Heat Break:Ender3/CR10 Heat Break: M6 thread, length 27mm, 4.1mm bore, GRADE5 Titanium alloyE3D-V6 Remote Heat Break: 1.75mm all metal, GRADE5 Titanium alloyPackage Included:1 x Heat Break..
$5.89
Ex Tax:$5.89
Stock: In Stock
Model: ST230044223
Descriptions:
The TL-Smoother is an addon module for 3D printer stepper motor drivers.
The board provides flyback diodes (freewheeling diodes) for the motor outputs, so that they are also protected against induction voltages in the unpowered state of the driver.
You will got smoother movement ..
$7.99
Ex Tax:$7.99
Stock: In Stock
Model: ST230047122
Buy More Save MoreFor 3Pcs Kit: Contact UsFor 4Pcs Kit: Contact UsFor 5Pcs Kit: Contact UsDescription: TMC2208 single-axis stepper motor drive chip, power tube built-in drive current 1.4A peak current 2A, voltage range 4.75V-36V, 256 subdivision; with patented technology spreadCycle..
$10.39
Ex Tax:$10.39
Stock: In Stock
Model: ST230049483
Introductions:
This is TMC2203 V3.0 UART mode stepper motor driver.
UART options are UART mode (had soldered)
TMC2208 V3.0 are equipped with the wire
It suit SKR MKSGEN L/Ramps 1.4
The more details of TMC2208 V3.0 driver can be viewed at Contact Us
Package ..
$6.99
Ex Tax:$6.99
Stock: In Stock
Model: ST230048718
Features:
• Super quiet, anti-jitter.
• The TMC5160TA-V1.0 single-axis stepper motor control driver IC with serial communication interface can be externally expanded MOSFET.
• Each coil motor current up to 20A, the maximum voltage of 60V DC.
• Supply voltage 9-36V (limited by the MO..
$17.00
Ex Tax:$17.00