Warm Tips: 1. he spare parts included in the product are subject to receipt in kind. Pictures are for reference only.2. It will no longer be sent with SD cards and USB and TF cards.Features:Build volume of 235 mm x 235 mm x 250 mm.32-bit mainboardSupport Auto Leveling Can Upgraded carborundum Glass ..
Specifications:1 The appearance is more shiny2 thread precision improvement2 The inner wall of the tube is smoother (reducing the chance of filament clogging)3 The interface is smoother and more precise (can effectively prevent the filament from leaking)Feature:Material: Titanium AlloyStandard: V6Ho..
HighlightsSelf-developed Clog DetectionPauses printing and returns to standby when a clogged nozzle is detected. After unclogging the nozzle, continue the printing process to complete the model printing. Avoid failures caused by nozzle clogging.Full Silent Printing Noise Lower than 45dbEquipped with..
Specification:12V for CR10:with the Aviation ConnectorSuitable for: CR-10, CR-10SNozzle Size: 0.4mmPackage Includes: 1 x Titan Extruder1 x 42-34 Stepper Motor1 x Hotend Kit(the mk8 head)1 x Stepper Motor Wire3 x V-Sl0t Wheel1 x Fixed Backplane1 x 4010 Fan1 x 5010 Turbo Fan24V for Ender3:with the T..
Type A = V6 Remote All Metal Type B = Ender-3/CR-10Titanium Alloy Heat Break:Ender3/CR10 Heat Break: M6 thread, length 27mm, 4.1mm bore, GRADE5 Titanium alloyE3D-V6 Remote Heat Break: 1.75mm all metal, GRADE5 Titanium alloyPackage Included:1 x Heat Break..
Descriptions:
The TL-Smoother is an addon module for 3D printer stepper motor drivers.The board provides flyback diodes (freewheeling diodes) for the motor outputs, so that they are also protected against induction voltages in the unpowered state of the driver.
You will got smoother movement ..
Buy More Save MoreFor 3Pcs Kit: ClickFor 4Pcs Kit: ClickFor 5Pcs Kit: ClickDescription: TMC2208 single-axis stepper motor drive chip, power tube built-in drive current 1.4A peak current 2A, voltage range 4.75V-36V, 256 subdivision; with patented technology spreadCycle trade high chopper frequency,..
Introductions:This is TMC2203 V3.0 UART mode stepper motor driver.UART options are UART mode (had soldered)TMC2208 V3.0 are equipped with the wire
It suit SKR MKSGEN L/Ramps 1.4
The more details of TMC2208 V3.0 driver can be viewed at this link: Click Here
Package Included:
1 x TMC..
Features: • Super quiet, anti-jitter.
• The TMC5160TA-V1.0 single-axis stepper motor control driver IC with serial communication interface can be externally expanded MOSFET.
• Each coil motor current up to 20A, the maximum voltage of 60V DC.• Supply voltage 9-36V (limited by the MO..
Description:The Touch automatic leveling sensor is a device that uses the Hall effect to achieve leveling. The position of the point can be obtained by touching the point on the hot bed, and then during printing, the z-axis height can be adjusted to compensate, and printing can be achieved even when..