3D Printer & Supplies

Specification:Model: 30 SeriesSize: M4, M5, M6Material: Carbon steelQuantity: 1..

Features:1.  300*300*3mm, for most of 3D printer model, can work at 300℃ for a long time 2.  Smooth surface, good thermal shock resistance 3.  Enable to make the inner temperature change gently while saving the power supplyNotes: Without back gluePackage Included:1x Hotbed Pad..

Specification: Material: silicone rubber (with 3M back glue) Size: 300 x 300 mm Voltage: 110V Power: 300W Advantage: Fast heating, silicone rubber hot bed, low power, high temperature, uniform heat transfer, long life, high thermal efficiency conversion. Easy to install an..

Specifications:Name: DC3007 BlowerVoltage：5VType：Oil shaft Centrifugal fanAirflow：8.5CFMPower：1.2WDiagonal hole pitch: 34MMCurrent: 0.15ALead length: 30CM (XH2.54 terminal)Runs for 3000 hours at 40°CPackage Included:1 x cooling fan..

Product Shipping List:Gold Double Texture Coated PEI Powder Steel Plate*1pcs Advantage:No more 3M Masking tapeNo more glue sticNo more ABS juiceNo more PEI sheet replacementEasy to printEasy to remove by bending and popping it offEasy to maintainDouble-sidedLower runing cost especially for printin..

Package Included:1 x 310*310*4.0mm Carbon Crystal Silicon Glass Plate..

Features:✔ Divided into A and B sides✔ Separate bending mode.✔ Support installation on hot bed, glass platform.✔ The printing is not warped, and no glue is needed for use.✔ PC material. Long-term temperature resistance within 130℃. 130-180℃ will weaken the magnetism but will not lose the magnetism...

Features:- The bottom slide block has 8 pulleys, and the bottom profile is relatively solid,This unique design allows the entire machine to run smoothly when printing. - With larger leveling nutsErgonomic design, easy to adjust - Ultrabase covered by microporous coating, shows stron..

Features:  - This products is using Metal heatsinks instead of plastic parts like original, more durable and has better heat leaking function.- The four nozzle extrusion head cross aluminum block, is suitable for the majority of DIY design enthusiasts. Specifications:  - Material: A..

Compatible: 1.V6 especificaciónCompatible con DDECompatible con PRUSA MK3SCompatible con BMG extrusoraCompatible con Titán extrusoraCompatible con todas las impresoras que usan V6 HOTEND2.CR10 especificaciónCompatible con CR-10Compatible con CR-10SCompatible con CR-10S -S5Compatible con CR-10S -S4Co..

Specifications: Heating Block  1. Size: 20mm*20mm*11mm 2. Material: 6061 aluminium alloy Nozzle1. Dimensions: 21mm * 7mm2. Matrial: Copper 3. Nozzle Accuracy: 0.6mm, 0.8mm, 1.0mm, 1.2mm (support 1.75mm) 4. Screw outer diameter:  6mm (Metric M6, tooth length 14mm, ID 2..

Feature:Excellent for cooling heatsinks on hot ends, prints, or other cooling needs Made of high quality PBT+30% glass line +VO Bearing is high precision, long life and low noise Temperature of usage environment: -20℃ to 75℃ Working environment temperature: 40℃ Service life: Can be continuous work..