Specifications:1 The appearance is more shiny2 thread precision improvement2 The inner wall of the tube is smoother (reducing the chance of filament clogging)3 The interface is smoother and more precise (can effectively prevent the filament from leaking)Feature:Material: Titanium AlloyStandard: V6Ho..
Specification:12V for CR10:with the Aviation ConnectorSuitable for: CR-10, CR-10SNozzle Size: 0.4mmPackage Includes: 1 x Titan Extruder1 x 42-34 Stepper Motor1 x Hotend Kit(the mk8 head)1 x Stepper Motor Wire3 x V-Sl0t Wheel1 x Fixed Backplane1 x 4010 Fan1 x 5010 Turbo Fan24V for Ender3:with the T..
Type A = V6 Remote All Metal Type B = Ender-3/CR-10Titanium Alloy Heat Break:Ender3/CR10 Heat Break: M6 thread, length 27mm, 4.1mm bore, GRADE5 Titanium alloyE3D-V6 Remote Heat Break: 1.75mm all metal, GRADE5 Titanium alloyPackage Included:1 x Heat Break..
Descriptions:
The TL-Smoother is an addon module for 3D printer stepper motor drivers.The board provides flyback diodes (freewheeling diodes) for the motor outputs, so that they are also protected against induction voltages in the unpowered state of the driver.
You will got smoother movement ..
Buy More Save MoreFor 3Pcs Kit: Contact UsFor 4Pcs Kit: Contact UsFor 5Pcs Kit: Contact UsDescription: TMC2208 single-axis stepper motor drive chip, power tube built-in drive current 1.4A peak current 2A, voltage range 4.75V-36V, 256 subdivision; with patented technology spreadCycle..
Introductions:This is TMC2203 V3.0 UART mode stepper motor driver.UART options are UART mode (had soldered)TMC2208 V3.0 are equipped with the wire
It suit SKR MKSGEN L/Ramps 1.4
The more details of TMC2208 V3.0 driver can be viewed at Contact Us
Package ..
Features: • Super quiet, anti-jitter.
• The TMC5160TA-V1.0 single-axis stepper motor control driver IC with serial communication interface can be externally expanded MOSFET.
• Each coil motor current up to 20A, the maximum voltage of 60V DC.• Supply voltage 9-36V (limited by the MO..
Description:The Touch automatic leveling sensor is a device that uses the Hall effect to achieve leveling. The position of the point can be obtained by touching the point on the hot bed, and then during printing, the z-axis height can be adjusted to compensate, and printing can be achieved even when..
Trianglelab ZS Nozzle Hardened steelCross-SectionsThe cross-sections of some products have not been processed. If you do not believe our photos, please cut our products and you will witness our high-quality workmanship.Features1.Nozzle is Hardened Steel Nickel Plated.Hardened steel material is very ..