- Stock: In Stock
- Model: ST22000995
- SKU: ST22000995
Introduction:
Nazgul5 V2 is a 5" size BNF (Bind-and-Fly) quadcopter. It adopts upgraded XL5 V5 FPV frame. Pre-tuned and pre-setup, everything you need is just bind-and-fly! Loads of power and smooth flights guaranteed using popular XING-E motors with long-lasting NSK bearings. Got a hard hit and snapped an arm? Don't worry, get spare arms with your order for easy field replacement. Want to mount your GoPro on this drone? Check our high-quality TPU camera mounts!
Note: R81-SPI Frsky Receiver (Compatible with Frsky ACCST D8)
Tips:
VTX is set to 25mW by default! Power levels above 25mW require a HAM license or approval from local authorities! Please ensure you fly on legal frequencies and apply the Betaflight VTX tables suitable for your region.
Description:
Item Name: Nazgul5 V2 Analog LED Version FPV Racing Drone
- SucceX-E F7 45A flight stack
- XING 2207 LED FPV Motor (4S 2750KV)
- Wheelbase: 240mm*240mm
- Body size: 170*170mm
- Propeller size: 5 inch / 5.1 inch
- FC mounting pattern: 30.5*30.5 / 20*20 mm
- FPV camera spacing: 19mm
- Weight: 399g (without battery)
Features:
- 5mm thick arm design for improved durability
- Quick swap replacement arms
- LED illuminated logo
- XING 2207 motors with LED Light
- 5-inch frame compatible with 5.1-inch propellers
- Classic True-X frame configuration
- Built-in TPU crash guards
- Supports both 30.5x and 20x flight stacks
| XL5 V5 Frame |
Wheelbase: 240mm*240mm Body size: 170*170mm Propeller size: 5 inch / 5.1 inch FC pattern: 30.5*30.5 / 20*20 mm FPV cam spacing: 19mm |
| SucceX-E F7 Flight Controller |
MCU: STM32F722RET6 216MHz Gyro: MPU6000 Barometer: DSP310 OSD: IFLIGHT AT7456E OSD BEC: 5V 2.5A BlackBox: 16MB UART Ports: 4 × UART (UART1/UART2/UART4/UART5) UART1: VTX HD / Analog Telemetry UART2: Receiver UART4: Free port UART5: ESC Telemetry 4 × Dshot/PWM motor outputs Support Smartaudio & IRC Tramp VTX protocol WS2812 LED Strip: Supported Buzzer: Built-in Firmware: IFLIGHT_SUCCEX_E_F7 Outer Size: 36*36mm Mounting hole: 30.5*30.5mm, Φ4mm Weight: 6.9g |
| SucceX-E 45A 2-6S BLHeli_S 4-in-1 ESC |
Dimension: 36*43mm Mounting Holes: 30.5*30.5mm / Φ3mm Weight: 15g (without wire) Input Voltage: 2-6S LiPo MCU: EFM8BB21 (24MHz), BLHeli_S 16.X Firmware Current Sensor: Yes BEC: No Continuous Current: 45A | Burst Current: 50A Signal Protocol: DShot150/300/600, MultiShot, OneShot Target: G-H-30 BLS 16.7 |
| SucceX Force 5.8G 800mW Adjustable VTX |
Model: SucceX-Force 800mW adjustable VTX 5V Output: Max 1A Input Voltage Range: 7V～36V Power Modes: PIT / 25mW / 200mW / 400mW / 800mW 48 frequency channels available Video Format: NTSC / PAL compatible Stable transmitting power, fast frequency locking Built-in power self-check function Dimension: 36*36*3mm Mounting: 4 × M3 holes Weight: 7.2g (excluding antenna) |
Additional Suggested Parts (Not Included):
- Battery: 4S 1550mAh LiPo
- Gopro Camera Mount
Package Included:
- 1 x XL5 V5 Frame
- 1 x Caddx Ratel Camera (2.1mm lens)
- 1 x Albatross RHCP SMA 5.8G Antenna
- 2 Sets Nazgul 5" 3-blade Propellers (4pcs/set, color random)
- 1 x 20*200mm PU Battery Strap (color random)
- 1 x 20*250mm PU Battery Strap (color random)
Note: Gopro camera mount is NOT included.
PRE-TUNED & PRE-SETUP:
- Factory pre-tuned PID & filters for excellent flight experience, no extra tuning required.
- Angle self-level mode enabled by default for beginner-friendly flight.
To restore factory tune or firmware, please refer to our "Firmware/Factory Dumps" guide.
Check our tutorial article: How to disable Angle Mode & enable Acro Mode.
