- Stock: In Stock
- Model: ST22004651
- SKU: ST22004651
Description:
151Pcs Tile Leveling System Tile Spacer Wall Leveler Wedges Spacers Flooring Wall Tile Carrelage Leveling System
Specifications:
| Product Name | Wedege tile spacer locator |
| Material | PP + 430 Stainlss Steel |
| Suitable Spacer | 2mm-8mm Spacer |
| Tile Thickness | 5mm-20mm |
| Quantity | 151 Pcs |
Features:
- Wear-resistant, resuable.
- Easy to use for DIY operation.
- Keep the tile balance on the same horizontal position.
- Improve tile installation speed.
- Reduce installer fatigue/stress.
- Virtually lippage free, flat surface drastically.
- Reduces the need for grinding and polishing.
- Prevents tiles from moving while curing.
Using Tips:
1.Paving the first tile, leave more than 2mm (use with cross spacer). Close to the tiles.
2.Insert T-shaped needle along the gap in the tile.
3.Then 180 degree rotation,T-shaped needle stuck at the bottom of the two tiles.
4.Adjust the caps with your hand/special wrench until the two tiles are on the same level.
5.About 5-6 hours after leveling, Before cement/adhesive is completely dry, rotate caps in the reverse direction, remove 180° T-needle until the word, take out.
Avoid not removing the T-tile leveling system:
1. Ceramic tile gaskets are 2mm or more (cross gaskets are recommended)
2. When leveling, the cement or tile adhesives around T-type leveller must be cleaned.
3. Remove the T-type straightener about 5-6 hours after leveling before the tile binder or cement is completely dried.
Package Included:
| 100 x | Tile Spacers |
| 50 × | Tile Leveler Spacers |
| 1 × | Wrench |
More Details:
