100/150Pcs Tile Leveling Floor Kit Alignment Clip Reusable Spacers Locator Kit

Description:

100/150Pcs Tile Leveling Floor Kit Alignment Clip Reusable Spacers Locator Kit

 

Specification: 

Material: High Quality PP + Stainless Steel

Color: Black+Orange

Applicable Brick Difference: 2-6mm / 0.08-0.24 "

Applicable Tile Thickness: 3-16mm / 0.12-0.63 "

Set 1: 100Pcs

Set 2: 150Pcs

 

Features:

- Wear-resistant, recyclable, reusable.

- Easy to use in DIY operation.

- Balance tiles in the same horizontal position.

- Improve tile installation speed.

- Reduce installer fatigue / pressure.

- There is virtually no crackless, flat surface.

- This reduces the need for sharpening and polishing.

- Avoid shingles from movement during solidification.

 

Usage Tips:

Lay the first tile, leaving more than 2mm (with cross joints). Close to tile.

Insert T-pins next to the gap between the tiles.

Then rotate 180 degrees and the T-needle is attached to the bottom of the two tiles.

Adjust the cover by hand / special wrench until the two tiles are on the same level.

After leveling for about 5-6 hours, before the cement / adhesive is completely dry, rotate the lid in reverse and take off the 180 degree T needle until the floor is removed.

 

Avoid not removing the T-leveling tile system:

1. Ceramic tile joints are 2mm or more (cross joints are recommended)

2. When leveling, adhesive cement or tile cement around T-type leveler should be cleaned.

3. Remove the T-type straightener about 5-6 hours after leveling before the tile or cement binder is completely dried.

 

Package Included:

100/150 x Tile Leveling System Floor Kit (Optional)

 

More Details: