2000W 220V Industrial Adjustable Temperature Hot Air Blower Rework Station with 2Pcs Nozzles
- Stock: In Stock
- Model: ST22008172
- SKU: ST22008172
$35.64
Ex Tax: $35.64
Features:
-Electronic temperature control.
-Sensor closed loop, microcomputer triggered temperature control over 0, temperature stability.
-Double v-ortex flow out of wind, soft air without damage.
-High quality alloy heating core, imported switch, imported motor.
-High and low two gear wind and temperature adjustment, minimum temperature 50℃ maximum temperature 650℃.
Application:
1. It can remove the old paint on the metal surface, and better effect use with hot air nozzle and the scraper.
2. Self sticky sticker can be removed.
3. It can be relieved of rust or too tight nuts and metal screws.
4. It can make the plastic hose bend.
5. Before handling the grease or replace the old mill, can first softening;
6. Dry the damp wood.
7. Heat shrinkable packaging film and packaging pipe.
8. Can collapsible polyethylene that used to connect metal.
9. Softening welding material.
Specification:
Color: Yellow/Blue
Material: Plastic Shell
Voltager: 220V/50Hz
Power: 2000W
Working Temperature: 60℃-650℃
Air Volume: 250L/min (Low mode) 500L/min (high mode)
Cable Length: approx.140cm
Size: approx. 26cm x 19cm
Weight:approx. 584g
Note: Can not adjust the temperature, dual temperature control can only adjust a high temperature file, a low temperature file.
Warning:
-Do not use the hot air g-un with the chemical (plastic) scraper
-Please remove the dry paint from the nozzle or the scraper to avoid the fire after use.
-Don't direct a hot wind directly to a person or an animal.
-Do not touch the nozzle when the hot air g-un is used or just used, and the handle of the hot air g-un must be dry, clean and away from the oil or gas.
-The hot air g-un will be completely cooled before it can be stored.
Package Included:
1 x Hot Air Blower (We will provide adapter according to delivery country)
2 x Nozzles
Detail Pictures:
