Automatic Electronic Water Timer Tap Irrigation Plant Watering Tool Controller
- Stock: In Stock
- Model: ST220016778
- SKU: ST220016778
$23.99
Ex Tax: $23.99
Feature:
1. The outlet can be connected with 4/7 pipes, 9/12 pipes, water distributors, PE pipes, garden pipes
2. Simple, reliable, water-proof
3. Manual watering available.
4. Can be attached to 3/4''(19mm) tap or faucet.
5. Once program set, it will repeat the cycles until new settings.
6. Frequency: (can be set at 1hour at least , 72hours max).
7. Run Time: can be set at 1min at least, 120 mins max).
8. Manual Watering: (turn the "Run Time" dial to "ON", it will start water immediately until the dial is turned to other positio.
Specifications:
Working water pressure: 1-5kg
Quiescent current: 5μA
Working temperature: 0-60℃
Working flow: 456-1432L/h
Output control method: Pulse output
Rated power consumption: <1W
Waterproof rating: IP65
All waterproof with cover, good customer review
Battery operated (LR03 2XAAA 1.5V Alkaline battery)(Not included)
1. Irrigation program setting: (any operation will be performed within 5 seconds)
Step 1: Select the watering frequency by dialing the dial on the left
Step 2: Select the watering time on the right
Example: Set to water for 5 minutes every hour
(1) First dial the right to select the watering time: 5 minutes;
(2) Select the watering frequency from the dial code on the left: 1 hour gear, when the first hour gear is dialed, the indicator light flashes twice, and the water starts to flow for 5 minutes. After 5 minutes, the water stops, and the water is re-irrigated every hour. 5 minutes.
2. Reselect the irrigation frequency:
When I want to change the frequency, I first select the time and then select the frequency range. Every time I change the frequency range, I reset the internal timing.
3. Temporary irrigation:
Dial the code dial on the left to “Reset”, dial the dial on the right to “On” to start watering, and dial to “Off” to close.
4. Program protection:
The time interval must be greater than the watering time, otherwise the machine will not start watering at the time, and this function will also stop when watering. For example: if the frequency is 1 hour and the watering time is 90 minutes, the unsuccessful water will not be discharged. If you start to choose 1 hour to water for 1 minute, when you are watering, the watering time is set to 90 minutes and it will immediately stop watering. The setting is unsuccessful.
Package Included:
1 x Automatic Electronic Water Tap Timer Garden Irrigation Controller
Details Pictures:
