Steel Wire Rope Balustrade Kit Jaw Swage Fork Eye Bolt Terminal Turnbuckle Saddle

Description Stainless Wire Rope DIY Balustrade Kit Jaw/Swage Fork Terminal Turnbuckle Saddle

 

Specification

Product Name: Balustrade Kit

Type: Architectural Fittings

Color: Chrome

Material: Stainless Steel Marine Grade 316

Recommended Run Length <10M (SR)

Swaging Method: Hydraulic

Suitable Wire Structure: 7x7, 1x19

Suitable Diameter of Wire: 3.2mm

End Connector: 5mm Fork Terminal

Tensioner: M5 Jaw / Swage Rigging Screw

Suitable Section Orientation: Flat, Stairs, Angle

Suits Wire Orientation in a Section: Horizontal, Vertical

Application: Balustrade Fencing

Qty: 1 Kit

 

Features

Precision Manufactured

Balustrade Kit for 1 Run of Wire

Post Connections MM (Metal to Metal).

Rustproof

 

Installation

1.The first end of the run has a 5mm Jaw / Swage Rigging Screw (for wire tensioning) swaged to the wire. This attaches to the first 15mm Mini Eye Bolt. The Eye Bolt fastens to a metal post or wall. The second end uses a 5mm Fork Terminal swaged to the wire to attach to the second 15mm Mini Eye Bolt which is fastened to the second post or wall.

 

2.Wire may be installed through the intermediate posts and 'cut to length'. Please make sure you expand the turnbuckles before measurement and drill the intermediate posts out to at least 4mm prior to swaging in place.

 

3.Alternately, if you build the wire before you install it, then the length of a wire run is determined by the 'inside to inside' post measurement less a fixed amount which represents the distance between the attachment posts 'taken up' by the fittings when installed and adjusted properly. The fixed amount for this kit = 200mm.

 

Package Include

1 x M5 Jaw Swage Rigging Screw (Slimline Closed Turnbuckle) Stainless Steel

2 x M6 Stainless Steel Mini Eye Bolts (perfect for drilling, tapping and threading into end posts with our convenient Drill Taps)

1 x Fork Terminal Stainless Steel