3KVA/2400W Hybr1d Solar Inversor 24V Battery Charger Built-in MPPT 80A Solar Charger 230VAC Output PV Max 450VDC Inverter POW-HVM2.4H-24V
- Stock: In Stock
- Model: ST230041960
- SKU: ST230041960
$399.99
Ex Tax: $399.99
Inverter Use Note:
The battery capacity of the correct matching system is determined according to the specific usage requirements of the load and application scenarios, otherwise it will easily lead to insufficient battery capacity or excessive waste of power generation. For details, please refer to the manual recommendation or consult online customer service.
>>>Manual: Click here to open<<<
Introduction：
PowMr 2400W Solar Hybr1d Inverter is a new hybr1d solar charge inverter, which integrates solar energy storage & means charging energy storage and AC sine wave output, suitable for 48V lead acid and lithium batteries, supporting tools/generators/solar charging.
The solar charging module applies the latest optimized MPPT technology to quickly track the maximum power p0int of the PV array in any environment and obtain the maximum energy of the solar panel in real time and output pure sine wave to convert DC into AC.
It can be widely used in DC to AC areas, such as solar AC power system, vehicle system, RV power supply, security monitoring system, emergency lighting system, field power system, household power system, etc.
Feature：
1.Pure sine wave inverter
2.Configurable input voltage range for home appliances and personal computers via LCD setting
3.Configurable battery charging current based on applications via LCD setting
4.Configurable AC/Solar Charger priority via LCD setting
5.Compatible with mains voltage or generator power
6.Auto restart while AC is recovering
7.Overload/ Over temperature/ short circuit protection
8.Smart battery charger design for optimized battery performance
9.Cold start function
10.WIFI/GPRS(Option)
11.Can connect to lithium battery
Battery Four Charging Mode：
CSO: Solar energy will charge battery as priority. Utility will charge battery only when solar energy is not available.
CUB: Utility will charge battery as priority. Solar energy will charge battery only when utility power is not available.
SNU (Default): Solar energy and utility will charge battery at the same time.
OSO: Solar energy will be the only charging source even if utility is available.
Three Load Working Mode:
SOL: Solar energy provides power to the loads as priority, then Battery, then Utility AC power.
UTI(Default): Utility will provide power to the loads as priority, then Solar and Battery power.
SBU: Battery power load first, then Utility.
This PowMr off grid solar inverter all-in-one does not support parallel operation, and does not support phase separation!
AC Output Wiring Note：
1. Only the Live and Neutral wires will be connected to the Output Terminal Block, the Ground will be connected to the screw terminal.
2. Make sure any circuit breakers are disconnected and ensure the unit is in the off position.
3. AC Output should NEVER be connected to public power/utility or a generator.
4. There are two terminal blocks with “IN” &“OUT” markings. Please do NOT misconnect input and output connectors.
Specification:
