- Stock: In Stock
- Model: ST220032024
- SKU: ST220032024
Product Features
This 2‑in‑1 USB female to HDMI male screen‑mirroring adapter cable delivers full 1080P synchronous video‑audio output. ABS housing with built‑in heat‑dissipation vent structure for stable signal transmission. Plug‑and‑play design, no extra driver installation. Mirror smartphone or tablet screen content onto HDTV, monitor or projector. Works for iOS iPhone iPad and Android‑based devices such as Samsung, HUAWEI, Xiaomi. Supports simultaneous charging while screen‑mirroring. Critical Compatibility Reminder: THIS CABLE REQUIRES EXTERNAL 5V‑1A POWER SUPPLY TO OPERATE NORMALLY. IT DOES NOT SUPPORT HDCP‑DRM‑PROTECTED STREAMING APPS including Netflix, Amazon Prime Video, Hulu, Xfinity, DIRECTV. Protected‑content playback may result in black‑screen output. For iOS system tap Trust button on pop‑up prompt. Some Android devices need dedicated mirror‑assist application. Package only includes one screen‑mirroring adapter‑cable unit. Mobile phones, TV, projector demo‑hardware shown on product‑images are not included. Do not violently bend cable, keep metal‑contact‑pins clean for stable signal.
Product Specifications
| Product Type | 2‑In‑1 USB Female To HDMI Male Screen‑Mirroring Adapter Cable |
| Housing | ABS plastic with heat‑dissipation vent |
| Wire Jacket | TPE wear‑resistant cable |
| Interface Plating | Nickel‑plated connector contacts |
| Video‑Audio Output | Up to 1080P full HD synchronous video and audio |
| Power Requirement | Mandatory external 5V‑1A power supply |
| System Compatibility | iOS 8.0 and above; mainstream Android smartphones tablets |
| Not Supported | HDCP‑DRM protected streaming apps (Netflix, Prime Video, Hulu etc, black‑screen risk) |
| Compatible Device List | iPhone, iPad, Samsung, HUAWEI, Xiaomi and other iOS Android mobile‑hardware |
| Application Scenario | Screen‑mirror for photo, local‑video, game, presentation to HDTV monitor projector |
| Notice | Cable‑only; phone‑tv‑projector‑hardware‑not‑included; must‑have‑5v‑1a‑external‑power; no‑hdcp‑drm‑stream‑support; avoid‑violent‑bending‑cable |
| SKU | ST220032024 |
| Package Contents | 1 × 2‑In‑1 USB‑Female‑To‑HDMI‑Male Screen‑Mirroring Adapter Cable |
Usage Reminder
First connect USB‑A power‑port to qualified 5V‑1A power‑adapter, connect HDMI‑male end to TV / monitor / projector HDMI‑input port, connect phone‑tablet to the USB‑female port of this cable. For iOS device: tap Trust when trust‑dialog pop‑up appears on mobile‑screen, wait several seconds for auto‑mirroring. For Android device: some models need to install dedicated mirror‑assist application to activate screen‑projection function. Local‑saved photos, local‑video, game‑content, office‑presentation can mirror normally. Streaming‑apps with HDCP‑DRM copyright‑protection will produce black‑screen phenomenon, this is hardware‑limitation not cable‑defect. Do not sharply bend cable body. Disconnect all connections after finishing‑use.
Frequently Asked Questions
Q: Does package include mobile‑phone or television projector?
A: No, only one screen‑mirroring adapter‑cable is supplied. Phone, TV and projector hardware need separate purchase.
Q: Why no image output after connection?
A: Check if you connected external 5V‑1A power‑supply (mandatory). Confirm TV‑source switched to correct HDMI‑channel. iOS tap Trust pop‑up; partial Android need mirror‑assist‑app. HDCP‑DRM streaming‑apps will show black‑screen, not cable‑fault.
Q: Can I watch Netflix / Amazon Prime Video with this cable?
A: No. This cable cannot decode HDCP‑DRM protected streaming‑content, playback will result in black‑screen. Works for local‑files, games and non‑protected‑content.
Q: What maximum resolution can this mirror‑cable achieve?
A: Support up‑to‑1080P full‑HD synchronous video‑audio output for supported devices.
Package Contents
1 × 2‑In‑1 USB‑Female‑To‑HDMI‑Male Screen‑Mirroring Adapter Cable
