- Stock: In Stock
- Model: ST230051552
- SKU: ST230051552
Action Camera Adhesive Mount Disclaimer Notice
1. Safety Warning: Only 2 pcs curved surface adhesive action camera mount base kit plus adhesive sticker pads included; outdoor action camera main host hardware for demo purpose is NOT contained inside package. Adhesive pad is single‑use only and cannot be repositioned after sticking.
2. Disclaimer: This aftermarket fixing‑mount hardware is universal outdoor action‑device installation spare part. Please cross reference hardware spec table and verify original equipment mounting‑interface outer contour before ordering. Mounting surface must keep fully clean and dry for optimal adhesive performance.
Core Product Features
- Aftermarket curved‑profile adhesive mount‑base kit for outdoor action‑device original fixing‑component loss‑damage renewal and helmet‑curved‑surface‑shooting‑setup‑work
- Specially shaped curved‑profile‑fit‑design matching arc‑shaped mounting‑surfaces such as sports‑helmet outer shell; equipped with high‑viscosity self‑adhesive‑sticker‑pad to realize stable surface‑bonding‑fixing‑effect for outdoor‑sports‑usage‑scene
- Package supplies two complete sets of mount‑base and adhesive‑sticker‑pad; simple stick‑on installation operation, no extra drilling‑transformation‑required; suitable for snow‑sports, skydiving, skate‑sports and diversified outdoor‑shooting‑application‑scenario
- Note: Compatibility is determined purely by original action‑device mounting‑interface outer contour, not outdoor action‑camera‑device brand. Please double‑check mounting‑hardware‑fit‑spec before purchase. Adhesive pad is single‑use disposable part.
- Please check cross reference hardware spec table below and verify original outdoor‑action‑device related specs before purchase
- Package contains only curved surface mount base kit and adhesive sticker pads; demo outdoor action camera main host hardware not included
Cross Reference Hardware Spec Reference (Only for hardware spec cross check reference, not brand indication)
| Product Type | Outdoor‑Action‑Device Curved‑Surface Adhesive‑Mount‑Base‑Kit (2 Sets) |
| Core‑Structure‑Feature | Curved‑Profile‑Fit‑Design For Arc‑Surface Installation |
| Fixing‑Accessory | High‑Viscosity Self‑Adhesive‑Sticker‑Pad (Single‑Use Disposable) |
| Typical‑Application‑Scene | Sports‑Helmet Curved Outer‑Shell Surface Mount |
| Package‑Content | 2 × Mount Base, 2 × Adhesive Sticker Pad |
| Reference Compatible Action‑Camera Model List | Hero4, Hero3 Plus, Hero3, Hero2, Hero1 correlated serial variant outdoor‑action‑camera equipment |
| Property | Aftermarket non‑original outdoor‑action‑device fixing‑spare‑hardware accessory |
| Remark | Data only for hardware spec cross check. Compatibility depends on action‑device mounting‑interface outer contour, does not represent any outdoor‑action‑device‑brand affiliation |
Package Included
- 2 × Curved Surface Mount Base
- 2 × High Viscosity Self Adhesive Sticker Pad
- Multilingual User Installation Safety Reminder Manual
Wide Application Scenarios
- Outdoor‑sports helmet curved‑surface camera‑fixing for snow‑sport skydiving skate‑sport shooting‑perspective‑setup
- Camera‑accessory‑shop spare‑inventory curved‑surface adhesive‑mount‑base‑kit outdoor‑shooting‑fixing accessory
- Outdoor‑shooting‑hobby‑user spare‑swap adhesive‑mount‑component for action‑camera helmet‑mount‑refit‑work
Installation & Safe Use Reminders
- Compare original action‑device mounting‑interface outer contour to confirm hardware matching before purchase and sticking‑operation.
- Thoroughly clean and fully dry target curved‑mount‑surface; remove grease dust impurity before applying adhesive sticker pad.
- Peel off protective release‑film; press mount‑base firmly onto target surface and keep stable pressure for sufficient bonding‑time. Do not re‑lift or reposition after adhesive contacts surface.
- Check adhesive bonding‑state regularly during high‑intensity outdoor‑sports; prevent inadequate‑bonding‑caused device‑fall‑drop‑damage risk.
Frequently Asked Questions
Q1 Will this curved‑surface adhesive‑mount‑base‑kit fit all outdoor‑action‑camera‑devices?
A1 Compatibility depends completely on original action‑device mounting‑interface outer contour, not outdoor action camera device brand. Please verify mounting hardware fit spec before ordering.
Q2 What are main specifications of this curved surface adhesive mount base kit?
A1 2pcs curved surface adhesive action camera mount base kit, high viscosity self adhesive sticker pad, curved profile fit design, helmet surface mount application, aftermarket outdoor action device fixing spare hardware accessory.
Q3 Does package include outdoor action camera main host hardware?
A1 No, only curved surface mount base kit and adhesive sticker pads plus safety installation reminder manual are supplied; demo outdoor action camera main host hardware is not included.
Q4 Is this adhesive‑mount‑kit exclusively for certain brand outdoor‑action‑camera‑devices?
A1 It is aftermarket universal outdoor action‑device installation spare part. Matching result subject to action‑device mounting‑interface outer contour, not exclusive for any outdoor‑action‑device‑brand.
