

















ESP32 433/868/915/923Mhz V1.1 WiFi Wireless bluetooth Module GPS NEO-6M SMA LORA32 18650 Battery Holder With OLED
- Stock: In Stock
- Model: ST230047010
- SKU: ST230047010
$39.08
Ex Tax: $39.08
Available Options
   Note: OLED is not soldered to T-BEAM
If you need additional OLED, you can buy it Contact Us
    Product Upgrade Content:
    1. Pin GPIO34 pin is replaced with GPIO35
    2. Replace the charging IC (TP5400) with the power management AXP192
    3. GPS TX, RX pin replacement
    4. Power on and remove, replace with button to open
    5. Reduced sleep current
    6. GPS battery replacement
7. ALL warehouses: Chip change to CH9102 (Update from 30/03/2022)
   OLED Description:
   1. Size: 0.96 inch
   2. High resolution: 128 * 64
   3. Color: white
   4. Viewing angle: > 160 °
   5. Driver IC: SSD1306
   6. Working temperature: -30  celcius ~ 80  celcius
   7. Module volume (generous): 27.0MM * 27.0MM * 4.1MM
   8. Supports many control chip: Fully compatible with , 51 series, MSP430 series,STM32/2, etc. (a lot of routines for reference)
   9. Wide voltage support: without any modification, directly supports 3.3V ~ 5V DC
   10. Ultra-low power consumption: Normal operation Is 0.04W
   11. IO port occupies minimal display: The IIC communication, as long as the two IO ports
   ESP32 Features:
   Lastest ESP32 Version: REV1
   WIFI
   bluetooth 
   4MB PSRAM
   4MB Flash
   3D Antenna
   LORA Features:
   Working voltage: 1.8~3.7v
   Acceptable current: 10~14mA
   Transmit current: 120mA@+20dBm,  90mA@+17dBm, 29mA@+13dBm
   Operating frequency: 433/470MHz(433HMz version) /868M/915M(868MHz version)
   Transmit power: +20dBm
   Receive sensitivity:
-139dBm@LoRa &62.5Khz&SF=12&146bps
-139dBm@LoRa &62.5Khz&SF=12&146bps
   -136dBm@LoRa &125Khz&SF=12&293bps
   -118dBm@LoRa &125Khz&SF=6&9380bps
   -123dBm@FSK&5Khz&1.2Kbps
   Frequency error: +/-15KHz
   FIFO space: 64Byte
   Data rate: 1.2K~300Kbps@FSK, 0.018K~37.5Kbps@LoRa        
   Modulation Mode: FSK,GFSK,MSK,GMSK,LoRa TM, OOK
   Interface form: SPI
   Sleep current: 0.2uA@SLEEP, 1.5uA@IDLE
   Operating temperature: -40℃- +85℃
   Digital RSSI function
   Automatic frequency correction
   Automatic gain control 
   Low voltage detection 
   Fast wake-up and frequency hopping
   Highly configurable data packet handler
   GPS:
   GPS modules NEO-6M, 3V-5V power supply Universal
   Destined module with ceramic antenna, signal super
   Save the configuration parameter data EEPROM Down
   With data backup battery
   There are LED signal indicator
   Default Baud Rate: 9600
   Power:
   TP5400
   1A Battery Management
   LED indicator: There are 4 LEDs show the battery status in real time.
   Pre-Flash Firmware: -SoftRF V4.0
   Package includes:
   
      1 x TTGO T-Beam ESP32
    1 x  Antenna
    1 x  0.96 inch 128X64  OLED
    2 x  Pin









Tags:
Bluetooth Module
 
 

 

 

 

 

 

 

 
