











DS211 ARM Nano Pocket Portable Digital Oscilloscope
- Stock: In Stock
- Model: ST22011162
- SKU: ST22011162
$89.99
Ex Tax: $89.99
Description:
DS211 is the update version of DS201.
It is a pocket size digital storage oscilloscope fulfills basic electronic engineering requirements.
Features :
DSO mini oscilloscope.
Rising/falling edge trigger.
Compact rectangular housing.
Large display screen.
Buttons on the side.
Mini pocket sized.
Compact and lightweight.
Store file as BMP, DAT, BUF, or CSV format.
Use build-in flash disk to save/read waveform image.
Math waveforms: DATA, -DATA, Inp+D, Inp-D, -Inp.
Output test signal: 10Hz-1MHz (1-2-5 step).
Synchronous mode: auto, normal, single, none, scan.
Auto measurement: frequency/duty cycle, DC RMS voltage/Vpp /Vmax/Vmin.
Specification :
Application:
Outdoor Maintenance(AC/DC Power and Inverters, floor fire equippment and circuit-control).
Hardware maintenance and software debugging RS232/RS485/I2C/CAN and so on circuit, LED display and scanning driver circuit via keyboard
Audio device and circuit, elecrtic toys and remote models, car circuit maintenance.
School tutoring and DIY electronic-development.
Somewhere needs to observe the slow signal changes (eg. Relay module and inch-switch, battery charge and discharge curve, temperature sensor measure and so on.)
Power for related circuit.
Package includes :
1 x DS0211 Digital Oscilloscope
1 x MCX Probe
1 x USB Cable
1 x User manual
Details pictures :
 ,
, ,
, ,
, ,
, ,
, ,
, ,
, ,
,
DS211 is the update version of DS201.
It is a pocket size digital storage oscilloscope fulfills basic electronic engineering requirements.
Features :
DSO mini oscilloscope.
Rising/falling edge trigger.
Compact rectangular housing.
Large display screen.
Buttons on the side.
Mini pocket sized.
Compact and lightweight.
Store file as BMP, DAT, BUF, or CSV format.
Use build-in flash disk to save/read waveform image.
Math waveforms: DATA, -DATA, Inp+D, Inp-D, -Inp.
Output test signal: 10Hz-1MHz (1-2-5 step).
Synchronous mode: auto, normal, single, none, scan.
Auto measurement: frequency/duty cycle, DC RMS voltage/Vpp /Vmax/Vmin.
Specification :
| Parameters of Mini DSO DS211 | |
| Model | DS211 | 
| MCU | STM32F103VC | 
| ADC | MCU internal ADC | 
| Channels | 1 Analog channel+1 Operation channel | 
| Analog Bandwidth | 200KHz | 
| Max Sample Rate | 1MSa/s | 
| Max Sample Memory Depth | 8K | 
| Horizontal sensitivity | 1uS/Div~2S/Div(1-2-5 step) | 
| Vertical Sensitivity | 20mv/Div~10V/Div(1-2-5 step) | 
| Analog Input Impedance | >500kΩ | 
| Coupling | DC/AC | 
| Synchronous Mode | Ascend/Descend Edge Trigger Mode | 
| AUTO_FIT | AUTO_FIT | 
| Math Waveforms | -A, RecA, A+ RecA | 
| Inbuilt Signal Generator | Sine/Square/Triangle/Sawtooth wave | 
| Synchronous Mode | Auto, Normal, Single, Scan | 
| Auto Measurement | Signal /cycle/duty ratio, peak voltage/virtual value/max value/min value/average | 
| Storage | 8MB USB flash disk memory | 
| APP installed | 1 | 
| Operation | Button | 
| USB port | MicroUSB | 
| Battery | 500mAh | 
| Screen Size | 2.8‘’ | 
| Screen Resolution | 320 x 240 | 
| Dimension | 106.5mm x 55.7mm x 11.5mm | 
| Weight(with Battery): | 65g | 
| Open Source | Application layer Open-Source | 
| Certifications | CE/FCC | 
Application:
Outdoor Maintenance(AC/DC Power and Inverters, floor fire equippment and circuit-control).
Hardware maintenance and software debugging RS232/RS485/I2C/CAN and so on circuit, LED display and scanning driver circuit via keyboard
Audio device and circuit, elecrtic toys and remote models, car circuit maintenance.
School tutoring and DIY electronic-development.
Somewhere needs to observe the slow signal changes (eg. Relay module and inch-switch, battery charge and discharge curve, temperature sensor measure and so on.)
Power for related circuit.
Package includes :
1 x DS0211 Digital Oscilloscope
1 x MCX Probe
1 x USB Cable
1 x User manual
Details pictures :
 ,
, ,
, ,
, ,
, ,
, ,
, ,
, ,
,
 
 

 

 

 

 

 

 

 

 

 
