Leiteng115 115mm Wheelbase F4 1S 3 Inch Toothpick FPV Racing Drone BNF w/ 40CH 25-400mW VTX CADDX Nano ANT Lite 1200TVL Camera
- Stock: In Stock
- Model: ST22001363
- SKU: ST22001363
$172.25
Ex Tax: $172.25
Available Options
Specification:
Model: Leiteng115
Wheelbase: 115 mm
Flight control: SPCMAKER F4 6A AIO Whoop(1S) flight control
Motor: Galloping G1202 11000KV brush-less motor
Propeller: HQProp T 3X2-PC 3-inch propeller
Camera: CADDX Nano ANT Lite 1200TVL camera
Image transmission: 5.8g 25/400MW 40CH image transmission
Receiver: Frsky/DSMX/Flysky/Futaba/ELRS 2.4G (optional)
Product size: 100mm*100mm*42mm
Weight: 39.8g (without receiver)
Packing size: 150x150x60mm
Weight: 185g
Motor:
Model: Galloping G1202 KV11000
Working rated voltage (Lipo): 1S
No-load current (4.0V): 1.3A
Online current: 5.31A
Power limit: 21.24W
Internal resistance between phases: 160mΩ
Lead specification: 30#AWG 48mm JST1.25
Rod: 9N12P
Shaft diameter: 1.5mm
Size: φ15.5*8.5mm
Weight (including wire): 3.6g
Flight Control:
MCU: STM32F411
Gyroscope: MPU6000
Screen display: AT7456E
Size: 31.5*31.5mm
Mounting hole: 25.5*25.5mm/φ3mm
Weight: 3g
BEC output: 5V 1.2A
FC firmware: MatekF411RX
ESC firmware: O_H_5
BLHeli BLHeli-S
Input voltage: 1S
Current: 6A continuous (8A peak)
Current scale: 400
Camera:
Model: Caddx Ant lite
Image sensor: 1/3" CMOS sensor
Horizontal resolution: 1200 TVL
TV system: NTSC and PAL (switchable)
Menu: Support
Image: 4:3
Synchronization: internal
Electronic shutter: PAL: 1/50~100,000; NTSC: 1/60~100,000
Signal to noise ratio: >52dB (AGC off)
Video output: CVBS
Lens: 1.8mm/F2.5
Minimum illumination: 0.001Lux
Automatic gain control: yes
BLC: Yes
WDR: Global WDR
DNR: 3D DNR
Size: 14*14mm
Wide power input: DC 3.7-18V
Working temperature: -20°C~+60C
Working humidity: 20%~80%
Weight: 1.7 grams (net weight)
VTX:
Working voltage: 5V
Output power: 25mW/50mW/100mW/200mW/400mW
Frequency: 5.8GHz 40CH
Video format: NTSC/PAL
Ratio mode
Support RCDRone OSD
Connector: UF.L (IPE-X)
Size: 15mmx15mmx3mm (without mounting holes)
Mounting hole: 16mmx16mm
Weight: 1.5g
Propeller:
Model: HQProp T 3X2-PC
Material: PC
Length: 3 inches, about 76.2mm (mm)
Color: transparent black
Quantity: 2 CW & 2 CCW
Aperture: 1.5mm
Weight: 3.8 grams (4 pieces.)
Lightweight, strong and balanced toothpick drone
Package included:
1x Leiteng 115 kit
1X SPCMAKER F4 6A AIO Whoop(1s) flight control
1X 5.8g 25/100/200/400MW 40CH VTX
1X CADDX Nano ANT Lite 1200TVL camera
4x Galloping G1202 11000KV brushless motor
4X HQProp T 3X2-PC 3 inch propeller
1X 5.8g UFL interface rod antenna
1X Frsky/ELRS 2.4G Receiver (optional)
1X PH2.0 plug 24AWG high temperature resistant silicone wire
1X packaging color box