3D Effect Slate Brick Wall Decal Sticker Faux Self-adhesive Wallpaper TV Wall Decor Sticke

1. The wall has been handled well painted wallpaper paste special base film, and let it dry.

2. to draw a vertical line from the ceiling to the floor, this line as the first piece of wallpaper paste edges.

3. According to a desired size cut a good wallpaper, and turn the cut wallpaper in order, and then compare the color dark to light carefully then the cut wallpaper should be arranged from dark to light or from shallow to deep, marked with serial number on the back. Note contrasting colors, so as not to stick wrong.

4. To brush glue evenly over the back of the wallpaper, you must brush the edge of the wallpaper, we can not stick to the front of wallpaper, to ensure a clean surface, avoid the risk of wrinkles. Over 3-5 minutes, then wallpaper soaked, the wallpaper can be pasted on the wall. Wallpaper paste to the wall, it should be removed air bubbles, wrinkles and excess glue carefully, the method is to use hard scrubbing brush, brush from the middle to both sides. When glue Stick on the positive of wallpaper used cloth to wipe it immediately.

5. Wallpaper should be affixed in a dry wall, the front of the wallpaper can not wipe with a damp cloth, to avoid fade after wet.

Material: Non-woven

Pattern: Stone

Color: Deep Grey, Light Yellow.

Size: 32.8*1.7ft

Non toxic,Wear-resistant, Breathable, Environmental protection,Durable

Suitable for the scene: bedroom, clothing store, bar, restaurant, cafe and so on