- Stock: In Stock
- Model: ST22006050
- SKU: ST22006050
Diesel Engine Oil Pump Hose Kit Disclaimer Notice
1. Safety Warning: Only high pressure oil pump crossover line hose repair kit included; diesel engine assembly and original oil‑pump main‑host hardware for demo purpose is NOT contained inside package. Professional diesel‑engine technician installation is strongly recommended; relieve internal oil pressure fully before dis‑assembly operation.
2. Disclaimer: This aftermarket hydraulic hose‑kit is universal diesel‑engine oil‑circulation‑system repair‑replacement spare part. Please cross reference hardware spec table and verify original hose‑line outer dimension and fitting‑profile before ordering. Mismatched fitting profile will trigger high‑pressure‑oil‑leak hazard.
Core Product Features
- Aftermarket complete crossover‑hose‑repair‑kit for diesel‑engine original oil‑circulation‑hose aging‑leak‑damage renewal and high‑pressure‑oil‑balance‑circulation‑maintenance‑work
- Heavy‑duty forged zinc‑plated steel fittings for rust‑corrosion‑resistance; adopt high‑performance viton 90‑duro o‑ring seals for stable high‑pressure‑sealing‑performance; rated 5800 psi working pressure, 23200 psi minimum burst‑pressure; wide operating temperature range from ‑50°F to 260°F
- Supplied with auxiliary heat‑shield protective sleeve; crossover‑hose builds balanced oil‑pressure‑bridge between dual pump‑heads, contribute to smoother idle‑running performance especially under cold‑temperature‑environment; kit contains 26cm hose, two pieces 45° joint, two pieces 0° joint with pre‑installed o‑rings
- Note: Compatibility is determined purely by original hose‑line dimension and fitting‑profile, not diesel‑engine‑assembly brand. Please double‑check hydraulic‑hardware‑fit‑spec before purchase.
- Please check cross reference hardware spec table below and verify original diesel‑engine‑oil‑circuit related specs before purchase
- Package contains only high pressure oil pump crossover line hose repair kit; demo diesel engine assembly and original oil‑pump main‑host hardware not included
Cross Reference Hardware Spec Reference (Only for hardware spec cross check reference, not brand indication)
| Product Type | Diesel‑Engine High‑Pressure‑Oil‑Pump‑Crossover‑Line‑Hydraulic‑Hose‑Repair‑Kit |
| Fitting‑Material | Forged Zinc‑Plated Steel |
| Sealing‑Component | Viton 90‑Duro O‑Ring Seals |
| Working‑Pressure‑Rating | 5800 PSI |
| Minimum Burst‑Pressure | 23200 PSI |
| Operating‑Temperature‑Range | ‑50 °F ~ 260 °F |
| Included‑Accessory | Heat‑Shield Protective Sleeve |
| Kit‑Contents‑List | 26cm Hose ×1, 45° Joint ×2, 0° Joint ×2 (O‑Ring Pre‑Installed) |
| Reference Compatible‑Engine‑Serial‑Spec | 7.3L correlated serial variant diesel‑engine equipment, production reference range 1999‑2003 |
| Property | Aftermarket non‑original diesel‑engine‑oil‑circulation‑spare‑hydraulic‑accessory |
| Remark | Data only for hardware spec cross check. Compatibility depends on hose‑line dimension & fitting‑profile, does not represent any automotive‑vehicle‑brand affiliation. Professional diesel technician installation required, fully release oil pressure before disassembly. |
Package Included
- 1 × 26cm Crossover Hydraulic Hose
- 2 × 45° Angle Joint (With Pre‑Installed O‑Ring)
- 2 × 0° Straight Joint (With Pre‑Installed O‑Ring)
- 1 × Heat‑Shield Protective Sleeve
Wide Application Scenarios
- Diesel‑engine original crossover‑hose leak‑damage replacement for high‑pressure‑oil‑balance‑circulation‑function recovery
- Diesel‑repair‑shop spare‑inventory high‑pressure‑oil‑pump‑hose‑kit engine‑hydraulic‑circuit maintenance‑replacement accessory
- Qualified diesel‑technician spare‑swap hydraulic‑hose‑component for engine‑oil‑circuit overhaul‑repair‑service
Installation & Safe Use Reminders
- Compare original hose‑line dimension and fitting‑profile to confirm hardware‑matching before purchase and assembling‑operation.
- Complete engine cool‑down period; fully release internal high‑pressure‑oil‑circuit pressure before hose‑disassembly‑fitment‑operation.
- Align joint thread profile, fasten fittings to specified torque‑value; avoid over‑torque‑force which may cause thread‑crack‑leak‑risk.
- Finish assembly; perform static‑pressure‑leak‑inspection before engine startup; re‑inspect joint sealing‑condition after short‑time engine‑idle‑run‑cycle.
Frequently Asked Questions
Q1 Will this crossover‑hose‑repair‑kit fit all diesel‑engine‑oil‑pump‑circuit‑assemblies?
A1 Compatibility depends completely on original hose‑line dimension and fitting‑profile, not diesel engine assembly brand. Please verify hydraulic hardware fit spec before ordering.
Q2 What are main specifications of this high pressure oil pump crossover line hose repair kit?
A1 High pressure oil pump crossover line hose repair kit, forged zinc plated steel fittings, viton 90 duro o ring seals, 5800 psi working pressure, minus 50f to 260f temperature rating, heat shield included, aftermarket diesel engine oil circulation spare hydraulic accessory.
Q3 Does package include diesel‑engine assembly or original oil‑pump main‑host hardware?
A1 No, only high pressure oil pump crossover line hose repair kit plus diesel hydraulic system installation safety reminder manual are supplied; demo diesel engine assembly and original oil‑pump main‑host hardware is not included.
Q4 Is this hydraulic‑hose‑kit exclusively for certain brand diesel‑engine‑assemblies?
A1 It is aftermarket universal diesel‑engine oil‑circulation‑system repair replacement spare part. Matching‑result subject to hose‑line dimension and fitting‑profile, not exclusive for any automotive‑vehicle‑brand.
