- Stock: In Stock
- Model: ST22001225
- SKU: ST22001225
MARK4 4K is equipped with 4K Tarsier V2 Camera of Caddx, and the highest 4K 30fps recording.Power with the use of the new design 2306.5 motor, and the new G5*4.3*3 Freestyle propeller, the overall power control sense is stronger, more powerful.
The Mark4 4K frame has been improved, No Propeller in view,no jelly. resulting in a clean picture.The product includes Mark4 4K 3D printed parts and spare parts.
Mark4 4K is carefully assembled and tested by the GEPRC team. When you get the BNF suite, you can bing and fly.For PNP suite, you need a sbus reciever of your own.
| New Version | Old Version | |
| FC | MCU: STM32F722 IMU: MPU6000SPI BlackBox: 8Mb onboard Flash OSD: BetaFlight OSD w/ AT7456E chip Baro：NO BEC Output: 5V@2A Integrated LC Filter Firmware target: GEPRCF722 Size: 36x36mm board, φ4mm with Grommets φ3mm | SPAN F7 Dual Gyro Flight Controller AIO VTX MCU: STM32F722RET6 IMU: 2x ICM20689(SPI) BlackBox: 32Mb onboard Flash OSD: BetaFlight OSD w/ AT7456E chip Baro: BMP280 BEC Output: 5V@2A Integrated LC Filter Firmware target: EXF722DUAL Size:36x36mm board, φ4mm with Grommets φ3mm |
| VTX | Independent 5.8G 48CH 600mW VTX Channel: 48 Power transmission: 0mW(Pit mode) /25/ 100/ 200/ 600mW Connector type: MMCX Connector Traditional button IRC Tramp protocol | Onboard 5.8G 48CH 600mW VTX Channel: 48CH Power transmission: 0mW(Pit mode) / 25/100/ 200/ 600mW Connector type: MMCX Connector Traditional button IRC Tramp protocol |
Brand Name: Geprc
Model: Mark4 4K
Item Name: 224mm Span F7 4S 5 Inch FPV Racing Drone
Weight:381g ( without battery )
|
Mark4 4K Frame Kit ( Improved Version) |
Material: Full 3K Carbon Fiber
Wheelbase: 224mm
Size:138*176mm
Mounting Holes: 30.5*30.5mm/20*20mm
Arms Plate Thickness: 5mm
Side Plate Thickness: 2.5mm
Top Plate Thickness: 2.5mm
Bottom Plate Thickness: 2.5mm
Protect Plate Thickness: 2mm |
|
50A BLheli_32 4in1 ESC ( F722-VTX Stack ) |
MCU: STM32FO51K86(32bit 48mHz)
Continuous Current: 50A
Peak Current: 55A (5S)
Current sensor: YES
Telemetry: Supported
Support DSHOT1200/DSHOT600, PWM, Multishot, OneShot42/125
Firmware Version: GEPRC-BL32-4IN1
Input Voltage: 3-6S Lipo |
| Geprc G5x4.3x3 5043 3-Blade Propeller |
Brand Name: Geprc Item Name: 5043 3-Blade Propeller Color: Transparent Blue Quantity: 2 CW & 2 CCW |
| Geprc GR2306.5 2450KV 4S Motor |
Configuration: 12N14P
Stator Diamter: 23mm
Stator Length: 6.5mm
Shaft Diameter: 4mm
Motor (Dimension: Φ28.2*29.2mm (Dia.*Len))
Wire AWG: 20AWG
Weight(g):31g (not include wire) |
| Caddx TARSIER 4K V2 FPV Camera |
FOV: 4K F2.8, FOV150°16/9), FPV FOV165°(4/3)
Lens: DUAL Lens F2.8/12Mega
Audio: DUAL DIGATIL MIC
CPU: Dual core dual system
Sensor: 12M sensor,1/1.8INCH 1/2.9INCH
Main Resolution:
4K/30fps 16:9
2.7K/60fps 4:3
1440P 60fps/30fps 4:3
1080p/90fps,60fps,30fps 16:9
720P120fps 16:9
CAMERA Bitrate : 50kbps/66kbps
Video System: NTSC/PAL
ISO:OFF/100/200/400/800/1600
ANTI-SHAKE:Hardware anti-shake
Scene Mode: Auto/Personage/Scenery/Defog
Dimension CAMERA: 19x20mm / DVR:29x29mm(HOLE:20x20mm)
Weight : 18g |
| Optional Receiver |
PNP Version: Without Receiver Frsky XM+ Receiver/ Frsky R-XSR Receiver/ Flysky A8S V2 RX / TBS Nano SE RX |
| Lipo Battery ( NOT Included) | Recommend 4S 1300mAh-1800mAh Lipo Battery |
Package Included:
1x Geprc Mark4 4K 224mm 4S FPV Racing Drone
