- Stock: In Stock
- Model: ST220012495
- SKU: ST220012495
Electric Hammer Motor Rotor Disclaimer Notice
1. Safety Warning: Only 6‑tooth electric hammer motor rotor included; rotary‑impact power‑tool main‑unit hardware for demo purpose is NOT contained inside package. Professional power‑tool repair‑technician installation is strongly recommended. Inspect winding insulation condition before assembly to prevent short‑circuit burnout‑hazard.
2. Disclaimer: This aftermarket motor‑armature rotor is universal rotary‑impact power‑tool repair‑replacement spare part. Please cross reference hardware spec table and verify original rotor tooth‑profile and outer dimension before ordering. Mismatched tooth‑profile or dimension will cause abnormal‑vibration and motor‑damage‑risk.
Core Product Features
- Aftermarket complete motor‑rotor‑armature for rotary‑impact‑power‑tool original rotor‑burn‑wear‑damage renewal and electric‑hammer‑motor‑power‑output‑function‑recovery‑work
- High‑quality pure‑copper winding construction for stable conductive‑performance, reduce heating‑loss during high‑speed‑rotation; physical total‑length reach 153 mm, tooth‑width parameter 9 mm; supply two optional variants: fine‑tooth type and coarse‑tooth type for different mechanical‑matching‑requirement
- Precision‑machined tooth‑profile for smooth mechanical‑meshing‑transmission‑effect; direct‑fit replacement for spec‑compatible rotary‑impact‑tool‑motor‑assembly; extend service‑life of impact‑hammer equipment; fit power‑tool‑repair‑workshop and hardware‑maintenance‑usage‑scenario
- Note: Compatibility is determined purely by original rotor tooth‑profile and outer dimension, not rotary‑impact‑power‑tool appliance brand. Please double‑check motor‑rotor‑hardware‑fit‑spec before purchase.
- Please check cross reference hardware spec table below and verify original rotary‑impact‑power‑tool‑related specs before purchase
- Package contains only 6‑tooth electric hammer motor rotor; demo rotary‑impact power‑tool main‑unit hardware not included
Cross Reference Hardware Spec Reference (Only for hardware spec cross check reference, not brand indication)
| Product Type | Rotary‑Impact‑Power‑Tool‑6‑Tooth‑Motor‑Rotor‑Armature‑Spare‑Part |
| Winding‑Material | Pure Copper Winding |
| Total‑Physical‑Length | 153 MM |
| Gear‑Tooth‑Width | 9 MM |
| Available‑Variant‑List | Fine‑Tooth Version, Coarse‑Tooth Version |
| Reference Compatible‑Power‑Tool‑Series‑Code | 26‑series correlated serial variant rotary‑impact‑power‑tool‑equipment |
| Property | Aftermarket non‑original rotary‑impact‑power‑tool‑motor‑armature‑spare‑accessory |
| Remark | Data only for hardware spec cross check. Compatibility depends on rotor tooth‑profile & outer dimension, does not represent any power‑tool‑appliance‑brand affiliation. Professional technician installation advised, inspect winding insulation to avoid short‑circuit motor burnout. |
Package Included
- 1 × 6 Tooth Electric Hammer Motor Rotor
Wide Application Scenarios
- Rotary‑impact‑power‑tool original motor‑rotor burn‑damage replacement for electric‑hammer motor power‑output‑function recovery
- Power‑tool‑repair‑shop spare‑inventory 6‑tooth motor‑rotor‑armature electric‑hammer‑maintenance‑replacement spare‑accessory
- Qualified power‑tool‑repair‑technician spare‑swap motor‑armature‑component for rotary‑impact‑tool‑motor‑assembly overhaul‑repair‑service
Installation & Safe Use Reminders
- Compare original rotor tooth‑profile and outer dimension to confirm hardware‑matching before purchase and assembling‑operation.
- Disconnect power‑tool from mains‑power‑supply before motor‑teardown‑fitment‑operation.
- Thoroughly inspect copper‑winding insulation layer, no scratch‑damage or bare‑copper‑exposure allowed, prevent electrical‑short‑circuit‑risk after assembly.
- Complete assembling‑work; perform no‑load rotating‑test, check for abnormal‑noise‑vibration condition before formal load‑working‑usage.
Frequently Asked Questions
Q1 Will this 6‑tooth motor‑rotor fit all rotary‑impact‑power‑tool‑motor‑assemblies?
A1 Compatibility depends completely on original rotor tooth‑profile and outer dimension, not rotary impact power tool appliance brand. Please verify motor rotor hardware fit spec before ordering.
Q2 What are main specifications of this electric hammer motor rotor?
A1 6 tooth electric hammer motor rotor, pure copper winding construction, total length 153 mm, tooth width 9 mm, fine coarse tooth two variant option, aftermarket rotary impact power tool motor armature spare accessory.
Q3 Does package include rotary‑impact‑power‑tool main‑unit hardware?
A1 No, only 6‑tooth electric hammer motor rotor plus power tool motor repair safety reminder manual are supplied; demo rotary‑impact power‑tool main‑unit hardware is not included.
Q4 Is this motor‑armature‑rotor exclusively for certain brand rotary‑impact‑power‑tool‑appliances?
A1 It is aftermarket universal rotary‑impact power‑tool repair replacement spare part. Matching‑result subject to rotor tooth‑profile and outer dimension, not exclusive for any power‑tool‑appliance‑brand.
