39pcs Glass Polishing Kit Scratch Remover Powder with Sanding Disc and Polishing Wheel

 

Cerium oxide is the best polishing powder to glass scrach because the chemical and physical reaction.

one strip of Masking tape ,to prevent water inside cellphone or watch , protect / cover the area no need polish.

Easy to use,just mix powder with water and apply to the glass surface with the polishing felt to restore lightly scratched windows, mirrors,

watch,even car headlights to like-new condition.

 

How to use:

1. Clean the area you're going to work on thoroughly. Be sure there is no dirt or grime on the glass.

2. Have two small plastic tubs ready; quart or pint sized containers work well. Fill one halfway with water.

3. Place your polishing wheel into the water; let it become thoroughly damp, but not dripping wet.

4. Put some of Cerium Oxide into the empty tub, and add enough water to create a slurry (a thin, paste-like mixture).

5. Attach the dampened polishing wheel to your electric drill and dip it into the slurry.

6. Place the polishing wheel on your work area, use small size felt wheel if scrach is near corner of windows, keep the wheel moving in an up and down and circular motion.
 

1  x 8 Oz High Grade Cerium Oxide Powder

2  x 2'' (50mm) Velcro Backing Pad

M6 shread( diameter of shank is 6mm, can be hold by most of drills)

4  x 2'' (50mm) Wool Felt Polishing Pad

2  x Wool Felt Polishing Wheel (Diameter: 3cm/2cm)

25  x 2'' (50mm) Sanding Discs (150/320/600/3000/7000 grit, each grit 5 pcs)