Stock: In Stock
Model: ST230045635
Please note:Choose the type you wanted.A = 1PCSB = 5PCSC = 10PCSD = 20PCSAssemble step:1. Put the consumables in the bag2. Seal the bag3. Put the manual air pump on the air valve to extract air4. After exhausting, remember to press it with your hand. Make the suction port flat, the sealing effect w..
$9.99
Ex Tax:$9.99
Stock: In Stock
Model: ST230045677
Features: - Compatible with UNO, Leonardo, Mega, 101 (Intel Curie), DUE, Micro, Mini, Nano
- Module supply voltage: 5v
- Interface: 1 I2C / TWI two-wire data communication interface, 2 gadgeteer interfaces
- I2C interface communication address: 0x20-0x27 (factory default addres..
$8.39
Ex Tax:$8.39
Stock: In Stock
Model: ST230044172
Specifications:
Applicable models: 3D printer nozzle 0.2mm / 0.3mm / 0.4mm
Available models: 0.2mm / 0.3 mm / 0.4mm (Optional, please choose the one you need)
Material: Stainless steel
Package includes:
1 x Nozzle-clearing drill
,,,..
$5.99
Ex Tax:$5.99
Stock: In Stock
Model: ST230048926
Specifications:
- Type: 3010 cooloing fan
- Material: Plastic
- Dimensions: 30x30x10mm
- Connector: 2 p (2.0) PH2.0-2P
- Rated: DC: 12V
- Nominal Current: 0.14 ± 10% Amp
- Nominal Speed: 5500 ± 10% rpm
- Air Flow: 7.9CFM
- Noise: 26 ± 10% dBA
- Bearing Type: Sleeve
- Lifetime: 3..
$5.99
Ex Tax:$5.99
Stock: In Stock
Model: ST230048911
3D Printer Ramps 1.4 LCD2004/12864 Controller Smart Adapter Module
Features:
Fits for RAMPS 1.4 smart controller LCD 2004 & LCD 12864.
Can easy connect it to your RAMPS1.4 shield using this smart adapter.
After connecting the panel to your RAMPS1.4 shield you can print your 3D designs without PC, ..
$3.15
Ex Tax:$3.15
Stock: In Stock
Model: ST230046343
Descriptions:
This adapter is for Megatronics Board Smart Controller LCD 2004 & LCD 12864. If you have ever bought a Smart LCD controller for RAMP1.4 or Sanguinololu, but want to use the controller connecting Megatronics Board, you only need to buy this adapter separately,wh..
$5.18
Ex Tax:$5.18
Stock: In Stock
Model: ST230043793
Description:
The module has an interface pinout is almost the same with A4988 stepper motor drive carrier, so that it can be used as a higher performance in a pull-down menu the plates replaced in many applications.
DRV8825 features an adjustable current limit, overcurrent and overtemperature pr..
$6.55
Ex Tax:$6.55
Stock: In Stock
Model: ST220013365
Specification:Material: BrassDiameter: 2/4/8/10/12mm Features:1. More resistant to wear and tear, greatly extending the life cycle of the ball screw life increased several times.2. More high temperatures in harsh environments without distortion to ensure stability.3. Smoother curve ball ball screw..
$7.99
Ex Tax:$7.99
Stock: In Stock
Model: ST230036902
3D Printer Teensylu V0.8 Hi3D RepRap Prusa Mendel Control Board
Description:
This is a project that is based on Sanguinololu. The ATmega644P has been replaced with an Atmel AT90USB1286 MCU. This Microcontroller has on-chip USB, removing the need for the FTDI USB UART. LUFA CDC bootloader prein..
$24.49
Ex Tax:$24.49
Stock: In Stock
Model: ST22005437
Descriptions:
3D Printing Fender Mudguard Support Protection Starter Kit Scooter Accessories Parts Replacement Sets For Xiaomi
Specifications:
Material: Plastic & Rubber
Color: Red / White / Black
Damping Size: 0.6 / 0.8 / 1.2mm
Compatible Model: Xiaomi M365 / M187 / Pro
Featur..
$19.79
Ex Tax:$19.79
Stock: In Stock
Model: ST230046395
Description:- Easy removal 3D printing platform for PLA and PLA-based materials. To use it, simply stick the bottom plate onto your build plate and start printing, peel up the top plate with finished prints, then peel off the top plate from the prints. Snap the top plate back into place for next rou..
$29.99
Ex Tax:$29.99
Stock: In Stock
Model: ST220017278
Description:
Type:3D Printing Accessories
Size: approx.235x235mm/9.26x9.26”
Temperature:about 400°C
Material:Borosilicate Glass
Quantity:1Pcs
Weight:about 735g
(1cm=10mm=0.39inch)
Measurement Details in the attached picture.
Package Include..
$29.99
Ex Tax:$29.99