JanusBPS 355*355mm Golden Different Face Steel Plate + Magnetic Sticker B-side + PEI Kit for 3D Printer

Product shipping list.
355mm gold dissimilar PEI powder steel plate *1
355mm magnetic sticker (B side)*1

Advantages.
1, with both smooth surface and powder surface, a steel plate can meet the requirements of two kinds of printing
2、Powder surface printing texture is clear and has characteristics

Printing reference temperature
1.PLA: (both sides are available)
Hot bed: 50-60℃
Nozzle: 200-210℃
Hot bed 60 ℃ nozzle 210 ℃
2.ABS (recommended powder surface, smooth surface temperature exceeds 80 after the surface is easy to blister)
Hot bed: 70-120℃
Nozzle: 240-250℃
3.PETG: (both sides are available)
Hot bed: 60-85℃
Nozzle: 230-245℃
4. Carbon fiber (both sides can be, and PLA is very close, nozzle recommended to use hardened steel)
Hot bed: 50-60℃
Nozzle: 200-220℃
5.TPU: (both sides are available)
Hot bed: 50-60℃
Nozzle: 200-220℃
Hot bed 60℃ Nozzle 220℃
6.Wood (both sides are available, and PLA is very close)
Hot bed: 50-60℃
Nozzle: 200-220℃

Caution.
1. Steel plate is an elastic steel plate, the use of the print base plate needs to be flat, magnetic absorption is stronger, can be firmly adsorbed on the steel plate on the base plate.
2. The first layer of the nozzle can not cut the platform, otherwise the nozzle will scratch the platform and wear the nozzle.
3. The first layer of printing when the nozzle can not be too far from the platform, or stick to the printing platform, the nozzle and the gap between the steel plate to be in an A4 paper or so.
4. The first layer of printing can not open the model cooling fan, otherwise it will affect the first layer of printing adhesion.
5. printing contact surface of the small model to add skirt.