











4K 144mm Stable Pro F7 3 Inch FPV Racing Drone PNP BNF w/ 500mW VTX Caddx 4K Tarsier Camera
- Stock: In Stock
- Model: ST22001483
- SKU: ST22001483
$336.59
Ex Tax: $336.59
Available Options
Geprc CineStyle 4K 144mm Stable Pro F7 3 Inch FPV Racing Drone PNP BNF w/ 500mW VTX Caddx 4K Tarsier Camera
Specification:
Model: CineStyle 4K
Item Name: 144mm Stable Pro F7 3 Inch FPV Racing Drone
Drone Wheelbase: 144mm
Material: Full 3K Carbon Fiber & CNC 7075
Frame Model: GEPRC GEP-CS3
Bottom Plate Thickness: 3mm
Top Plate Thickness: 3mm
Net Weight: 163g ( without battery , propellers)
Package Included:
1x Geprc Cinestyle 4K FPV Racing Drone
1x Momoda RHCP Antenna
1x Spanner
1x 1.5L Type Screwdriver
2x Antivibration Sponge
2x 2.4G Antenna Tu











Specification:
Model: CineStyle 4K
Item Name: 144mm Stable Pro F7 3 Inch FPV Racing Drone
Drone Wheelbase: 144mm
Material: Full 3K Carbon Fiber & CNC 7075
Frame Model: GEPRC GEP-CS3
Bottom Plate Thickness: 3mm
Top Plate Thickness: 3mm
Net Weight: 163g ( without battery , propellers)
| Geprc Stable Pro F7 Stack- Dual Gyro F7 Flight Controller | Model: Stable Pro F7 Item Name: Dual Gyro F7 Flight Controller 
MCU: STM32F722RET6 
IMU: 2x ICM20689(SPI) 
BlackBox: 32Mb onboard Flash 
OSD: BetaFlight OSD w/ AT7456E chip 
Baro:NO 
BEC Output: 5V@3A 
Integrated LC Filter 
Input Voltage: 2-6S Lipo 
Firmware target: EXF722DUAL 
Size: 26x26mm board, 20mm mounting holes (M2) | 
| Geprc Stable Pro F7 Stack- 35A BLheli_32 4in1 ESC | 
MCU:STM32F051 
Input:2-6s lipo 
Constant:35Amps 
Burst:45Amps 
Dimensions:31*31mm(including the power pads) 
Mounting Holes:20*20mm,M2 
Supports Dshot1200,Proshot,Oneshot42/125,Multishot 
Current meter: Yes 
Target: GEPRC-BL32-4IN1 | 
| Geprc Stable Pro F7 Stack- 5.8G 48CH 500mW VTX | 
Input voltage: 5V 
Channel: 48 
Power transmission: 0mW(Pit mode) / 25mW / 100mW / 200mW / 400mW/ 500mW 
Size: 24 * 26 mm 
Mounting Holes Dimension: 20mm x 20mm 
Connector type: MMCX Connector 
BEC Output: 5V/1A for Camera of FC 
Weight: 2.3g 
- Traditional button 
- IRC Tramp protocol | 
| Geprc GR1507 3600KV Motor | Model: GR1507 Item Name: 1507 3600KV Motor KV: 3600KV 
Configuration:12N14P 
Stator Diamter:15mm 
Stator Length:7mm 
Shaft Diameter:2mm (Hollow) 
Motor Dimension :19.6x29.1mm (Dia.xLen) 
No.of Cells: 3-4S Lipo 
Internal Resistance:104mΩ 
Max Current(15S): 35A 
Rotor: N52H arc magnets 
Bearings: NSK 
Base casing: Al 7075 
Wire AWG: 24AWG 
Weight: 15.5g Motor Link | 
| Geprc 3042 3-Blade Propeller | Item Name: 3042 3x4.2 3 Inch 3-Blade Propeller Quantity: 10 CW & 10 CCW Color: Transparent Grey Propeller Link | 
| Caddx Tarsier 4K 1200TVL Dual Lens Camera | Dimension: Camera 19x20mm ; DVR 29x29mm (Hole: 20x20mm) Weight: 18g Color: Bule FOV: 4K F2.8, FOV 150 Degree(16/9) ; FPV FOV 165 Degree(4/3) Lens: Dual Lens F2.8/12Mega Video System: NTSC/PAL Input: 5-12V Camera Link | 
| Optional Receiver Version | PNP Version: Without Receiver - Frsky XM+ Receiver - Frsky R-XSR Receiver - TBS Nano SE Receiver | 
| Recommend Lipo Battery ( NOT Included) | Recommend 4S 650-850mAh Lipo Battery | 
Package Included:
1x Geprc Cinestyle 4K FPV Racing Drone
1x Momoda RHCP Antenna
1x Spanner
1x 1.5L Type Screwdriver
2x Antivibration Sponge
2x 2.4G Antenna Tu











Tags:
FPV Racing Drone
 
 

 

 

 

 

 

 
