900W Rusty Nut Screw Remover Ductor Magnetic Induction Heater Kit Automotive Flameless Heat
- Stock: In Stock
- Model: ST220015107
- SKU: ST220015107
$276.99
Ex Tax: $276.99
Features:
1. Flameless Lossless Heating system.
2. 1 minute Removal process. 97% Lower power consumption by. 1 cent removing 1 bolt only cost you 1 cent. 1.9 Kg weight.
3. Adopt heat conduction technology, no flame, safe and environmental protection. It greatly reduces the risk of accidents and potential damage.
4. Fastest 60 seconds to 500 degrees centigrade, rapid heating, easy to remove rusty screws with wrench.
5. Do not damage the bolt and the material around the equipment.
6. Easy to use, only 3 minutes to master.
7. Equipped with two LED lights for narrow and dark space.
8. More coils are available. Each line is suitable for the size of different types of bolts.
9. The size of two books. Compared with conventional flame tools, it can save the space division and capital input quick dismantling wire gun. It is not limited to cars, agricultural equipment, ships and tanks. It is very suitable for the maintenance of various machine tools.
Specification:
| Model | 12V | 110V | 220V |
| Input voltage | 12V | 110V 50/60Hz | 220V 50/60Hz |
| Input current | 40A | 7A | 4A |
| Output power | 500W | 500-900W | 500-900W |
| Output voltage | 40V | 45V | 25V |
| Output current | 120A | 180A | 180A |
NOTE: The maximum working time for a single operation is 4~5 minutes, and it will be overheated! After overheat protection, the main engine and coil should be cooled before they can be used for the second time.
Packing Included:
1 x HBR Main
1 x 1.1m Flexible Soft Coil
1 x 18mm coil(diameter of bore) (Length 20cm)
1 x 22mm coil(diameter of bore) (Length 20cm)
1 x 28mm coil(diameter of bore) (Length 20cm)
2 x Screw
1 x User Manual
Detail Pictures:
Detail Pictures:
