Feature: 1. Input: DC 6V - 12V ( input voltage must be higher than the output voltage to 1V or more. )2. Output : 5.0V (+-0.05v error ), 800mA ( load current must not exceed 800ma)3. Three pairs of panel design, layout nice ;4. Specially designed two pin mounting holes, can be dir..
Description: USB boost/buck power supply module, powered by USB, adjust potentiometer to get the required voltage. Features: 1>.One button to turn off the output; 2>.Supply ON/OFF display screen; 3>.Support low power mode; 4>.Support sleep mode; 5>.S..
Features:
-The product is easy to install and can be used directly on the motherboard.
-Worldwide universal input voltage: 85-264V AC or 110-370V DC
-High efficiency, high power density, low output ripple, high output voltage accuracy
-High isolation between input and output
-Over current protecti..
Feature:
The DC-DC power module is automatically buck-boost to support the shutdown function.
The maximum input voltage is 15VDC, the quiescent current is less than 200uA, the fixed output is 4.2V and the maximum output current is 600mA.
Design work frequency of up to 1...
Features: - Fixed turn lamp current is 0.1 times the current value ( Used to identify whether the battery is fully charged When charging).- Made from a dedicated benchmark IC and high-precision current sensing resistor, proving a more stable constant current, (when 20°C to 100°C constant cu..
Feature:Input: DC 6V--12V (The input voltage must be higher than the output voltage by more than 1V.)Output: 5.0V (+-0.05v error), 800mA (load current cannot exceed 800ma)Specially designed two pin fixing holes, which can be directly fixed on the hole plate for expansion experiments;Inp..
Feature:This module uses the LM2596 chip, high efficiency (up to 92%), low heat, can be very easily used to above 3A current, in conjunction with the original TI op amp control output current, so the overall output is very stable.
This module uses the original Sanyo low ESR filter capacitor, you c..
Description:DPS Series CNC relatively early NC products, software and hardware have been greatly improved.Operational aspects reserved V / A hot key, you can quickly set the voltage and current.Screen refresh rate also increased more than two times that is no sense of delay.Inc..
Description:
PCIE, PCI dual-slot design, compatible with all desktop computers.
The relay is physically insulated and does not burn the motherboard.
Four-channel POWER SW design does not affect the original power button boot function, easy installation.
Computer motherboard powe..